 BlueWater Mfg Roof Hatch Railings Brochures
Finally -- A Fall Prevention System that protects your investment while Complying with OSHA regulations!
In most situations, OSHA (Std. 29 CFR 1910.23) requires guardrail protection on the exposed sides of openings in roofs and floors.
BlueWater Mfg. has modified our SafetyRail 2000 guardrail system to meet those safety concerns. Our Roof Hatch/Skylight Systems exceeds OSHA Std. 29 CFR 1910.23 and 1910.27. It is the only product available in the market with a gate assembly that meets the same OSHA regulations and requires no drilling into any surface for installation. The Roof Hatch/Skylight Systems set up in minutes and are easily dismantled for roof repair. Sized gates enable the Roof Hatch System to be located within 6 inches of the open roof hatch.
Do Not Void Your Warranty!
Stop Drilling into Roof Decks.
Stop Drilling into Roof Hatch and Skylight Curbs.
Stop Drilling into Floors.
Stop Drilling - Period!
Features:
Non-Penetrating.
Independently tested and shown to meet and exceed OSHA Fall Protection Regulations for Guardrails.
Sets up in minutes.
The engineered bases enables the system to be set up in numerous configurations (L-Shapes, Straight Runs, Etc.).
Easily dismantled for roof deck repair.
The gate can be opened by the latch pole or by one of the latches.
1-5/8" diameter rails have a quality Powder Coat finish.
Use as roof hatch, skylight, fire vent and floor door protection.
URL: http://www.bluewater-mfg.com/App_Roof-Hatch.htm
News archive:
Roof Hatch Fall Protection (May 11, 2007)
07 72 00 - Roof Accessories
07 72 13 - Manufactured Curbs
07 72 23 - Relief Vents
07 72 26 - Ridge Vents
07 72 33 - Roof Hatches
07 72 36 - Smoke Vents
07 72 43 - Roof Walk Boards
07 72 46 - Roof Walkways
07 72 53 - Snow Guards
07 72 63 - Waste Containment Assemblies
07720 - Roof Accessories
Copyright © 1996–2010 AECinfo.com – Product presentation: information, news and documentation about Roof Hatch Railings.
| 
