S9304 Super-Krete Micro-Bond (Just Add Water!)

Super-Krete® Micro Bond is a pre-blended product which is mixed with water only and applied over surfaces such as damaged or deteriorated concrete, asphalt, wood decks, above grade decks, bridge, tennis courts, etc. The application of Super-Krete® Micro-Bond eliminates, in most cases, the need to remove and replace damaged or deteriorated concrete or asphalt.

Super-Krete® Micro-Bond is a single component, ready mixed product designed for use as a thin-set overlayment for concrete, masonry, stucco, wood, metal and other surfaces.

Super-Krete® Micro-Bond contains a dried version of highly successful Super-Krete® Liquid co-polymer, and a blend of special components that ensure superior bonding to nearly any substrate. Super-Krete® Micro-Bond has a proven success record in every type of climate and is unaffected by freeze/thaw conditions and salt treatments.

Super-Krete® Micro-Bond is water resistant and may be used as a two coat moisture vapor barrier underlayment system. Delamination of waterproofing products is substantially or totally reduced when applied over this two coat system. See spec no. S-1000.

Characteristics & Advantages

Uses

Packaging

Super-Krete® Micro-Bond is available in five (5) and fifty-five (55) gallon containers, and bags, 48 net pounds and 528 net pounds of material respectively, for protection against moisture.

Coverage

One five gallon container, or forty-eight (48) pounds, when mixed with water, will cover approximately 750 square feet when applied using a squeegee application depending upon the surface porosity or roughness. A two or three coat application may be required to cover cracked or deteriorated surfaces.

Properties

Appearance: Concrete Gray or pigmented colors in dry, powdered form

Odor: None

Specific Gravity: 3.15

Percent Volatiles: 0 by Volume

COPYRIGHT 2000-2001 SUPER-KRETE International, Inc.