Mortar Net® USA, Ltd.
|
All manufacturers
Click here to view the
full company information
in AECinfo.com.
Mortar Net® USA, Ltd.
Mortar Net
[1]
HouseNet
[1]
Weep Vent
[1]
BlockNet
[1]
Blok-Flash
Blok-Flash Technical data/sizes
Specifier Note: Blok-Flash® is a high-density polyethylene composition molded into a .0625 inch thick (1.59 mm) flashing pan with .3125 inch (7.94 mm) perimeter flanges. The .0625 inch (1.59 mm) concaved weep spout with a .20 inch (5.08 mm) x .64 inch (16.26 mm) opening and a 45 degree drip edge extends 1.0 inch (25.4 mm) from the outer flange. The inner and outer flanges are spaced to allow for 1.0 inch of mortar bond between the upper and lower course of C.M.U. in 8”, 10”, or 12” wall systems. The weep spout ceiling extends 3.5 inches (88.9 mm) from the outer flange into the center of the pan and acts to suspend mortar, keeping the weep channel clear. Blok-Flash® is impervious to water and includes chemical stabilizers to protect against UV degradation.
TotalFlash
[1]
Click here to view the full company information in AECinfo.com.
