Ray-Bar Engineering Corporation   Shielded Doors

Ray-Bar Lead Lined Solid Core Wood Doors are manufactured to National wood work standards, constructed with the finest core, edging and face veneers available. Standard In-Stock veneers are: Rotary Cut Natural Birch, Plain Sliced Red Oak, Hardboard, Rotary Cut Mahogany, Legacy Walnut, Legacy Oak, Mendocino Oak, and all currently produced plastic laminates such as Wilsonart, Formica, Nevamar, Pionite, etc. are available for prompt delivery. Lead lined wood doors are available non-rated and up to 20 minute fire-rated. For listing of In-Stock lead thickness' available, see 'Ray-Bar Sheet Lead Stock Thickness Chart.' For specifications, see 'Ray-Bar Lead Lined Solid Core Wood Door Specifications.' Lead Lined Solid Core Wood Doors also available with Ray-Bar Lead Lined Vision Lite Frames, or Lead Lined Light Proof Louvers when required. Lead Lining of Hollow Metal Door Frames available installed in frames or in preformed kits. Line inside of frames with single unpierced strip of sheet lead of not less than same thickness as doors and walls in which installed. Form lead shields around areas prepared to receive hardware. Fabricate lead lining wide enough to maintain an effective overlap with lead adjoining shielding units.

Accessories For Shielded Doors

• Shielded Steel Astragals (rated to 3 hour)
• Shielded Aluminum Astragals (rated up to 90 min.)
• Shielded Threshold Kits
• Shielded Door Sweeps
• Lead Lining Of Hardware
• Lead Lining Frame Kits

For information and availability contact us.
Lead Lining of Lock Sets / Hardware also available, please contact us.

Ray-Bar Lead Lined Hollow Metal Doors are made from premium Hot Dipped Galvanized Steel in 18, 16 and 14 gauge steel conforming to ASTM A527, coating Classification ZF001 with no visible seams on faces or edges. Lead Lined Hollow Metal Doors are "ready to paint" or supplied with plastic laminate on faces. Available non-rated, or with fire-ratings up to 90-minute ("B" label) and up to 3-hour fire-rating ("A" label). UL Listed for fire resistance and meets UL IOC and UBC 7-2-1997 positive pressure test requirements part I and II. Available with or without Lead Lined Vision Lite Frames. Ray-Bar for "Specialty Applications" can also provide lead lined doors as stainless steel (304 with #4 finish), and bullet resistant (UL752) in Level 1 (medium power small arms), Level 2 (high power small arms), Level 3 (super power small arms), and also as a certified Level 4 (high power rifle). For specifications, see 'Ray-Bar Lead Lined Hollow Metal Door Specifications.' For listing of in-stock lead thickness' available, see 'Ray-Bar Sheet Lead Thickness Chart' or contact us for special designs or questions.

Ray-Bar Neutron Shielded Door and Frame

Ray-Bar Neutron Shielded Doors, manufactured Lead Lined and/or Borated Polyethylene (BPE) filled cores with steel faces and edges, to customer specifications for over twenty five years. These doors are custom manufactured to suit each individual linear accelerator radiation / oncology project requirement based on linear accelerator energy output, radiation type, orientation to radiation sources, primary beam configuration and overall room design, as either sliding or hinged, swinging doors in new and retrofit applications weighing up to 40,000 lbs. each. Neutron door composition requirements should be determined by a qualified health radiation physicist. See 'Ray-Bar Neutron Shielded Door Specification' for more information or contact us.

Ray-Bar Industrial Type Lead Lined Doors are custom manufactured to meet heavier lead requirements associated with industrial X-Ray or Non-Destructive Testing Rooms. These doors can be furnished with complete top-hung industrial capacity type sliding track and hardware, for new and retrofit applications. See 'Ray-Bar Sheet Lead Thickness Chart' for lead sheet and lead plate values carried In Stock. See 'Ray-Bar Industrial Type Lead Lined Doors Specification' for more information or contact us.

All calculations for shielding requirements should be determined by a qualified health radiation physicist currently recognized by the state in which the project occurs. Please see 'Diagnostic Radiation Shielding Considerations' for more information.

These products and materials are for medical and industrial use and applications only
(not to be utilized for residential applications)

URL: http://www.raybar.com/

3-Part CSI specifications
Description	Format	Size
General X-Ray Specifications Section 13090, X-Ray Protection Ray-Bar Lead Backed Drywall Specifications Section 09250 Gypsum Board Ray-Bar Lead Lined Wood Door Specifications Section 08200 Wood and Plastic Doors Ray-Bar Lead Lined Hollow Metal Door Specifications Section 08100 Metal Doors Ray-Bar Neutron Shielded Door Specifications Section 08300 Specialty Doors Ray-Bar Industrial Type Lead Lined Door Specifications Section 08300 Specialty Doors Ray-Bar Engineering Lead Sheet Stock Thickness, Weights & Sizes Shielding Information Diagnostic radiation shielding considerations	COM/	1 kB

Check the box to request more information.

Enter your details in the form below.

*Request for Information / Request a Catalog
To request more information from Ray-Bar Engineering Corporation, please complete the form below.
*Name:
*Email:
Company:
*Company type:
Phone:
*Address:
*Request:
		(* = Mandatory field)
Please add me to the mailing list for the free bi-monthly AECnews e-Newsletter.

08 34 46 - Radio-Frequency-Interference Shielding Doors
08 34 49 - Radiation Shielding Doors and Frames
08340 - Special Function Door
13 49 00 - Radiation Protection
13090 - Radiation Protection

Home | Terms of Use | Privacy Statement | Link to AECinfo
AECinfo is a member of Docu Group, the world's largest building products information network.

Back to normal layout