NEOTEC^™

The NEO TEC^™, 4 channels chasing neon, a revolution in the special effects lighting industry. NEO TEC^™ comes in 6 colors and can be controlled   y most 4 channels chasers. NEO TEC ^™ is available in 2 feet lengths, and connect end to end by as specially patented 5-pin plug that changes chase sequences. NEO TEC^™ can operate with 3 American DJ^® controllers with corresponding adapters for the NEO TEC/C (can control up to 100 NEO TEC sticks), CC-2016, and RL-101 rope light controller. Each tube's 5-pin plug can be rotated, connecting to any other 4 channels, giving a varying chase effect. NEO TEC^™ can be creatively costructed into letter shapes (see diagram below). At 110V, 3W, this innovative chasing neon is great for night clubs, bars, store fronts, restaurants, roller rinks, bowling centers, bands and mobile DJs.

AVAILABLE COLORS:

Neo Tec/C Controller for NEO TEC Built-in programs, Speed Control, Can control up to 100 NEO TECS	Neo / EX5, 10,25,50 Extension for NEO TEC - Available in 5, 10,25 & 50 foot lengths.	Neo / CC-2016 NEO TEC Adapter for use with CC-2016 chase controller.

Neo / AC 100 110V A/C Adapter Cord and plug for NEO TEC	Neo / RL-101 NEO TEC Adapter for use with RL-101 rope light controller.

Sample diagram of possible lettering.

N-30 / N-50

N-30

• 30 ft, 120V single circuit rope • May be cut at every 18 in. or run continuously to create signs, decorations, outlines. etc. • Run around stages, bars , ceilings, etc. • Splicers and connectors are available allowing several N-30s to be linked together • Available colors: Clear, Red, Blue, Green, Amber, Yellow, Purple and Pink • Good for outdoor use too • N-30 Accessories sold separately • 120V

N-50

• 4 channel chasing 120V single circuit rope • Comes in a 50 ft lengths • Run continuously to create signs, decorations, outlines. etc. • Run around stages, bars, ceilings, etc. • Great for outdoor use • Available colors: Clear, Red, Blue, Green & Yellow • 120V

•N-50/ Controller sold separately

N-30 Accessories

N-1	Power Cord.	N-7	Suction Cup Mount
N-2	Splice Connector.	N-8	Invisible Splice Connector.
N-3	Power Connector.	N-9	Plastic Mounting Clip.
N-5	6 ft. Channel.	N-11	T-Connectors.
N-6	End Cap.	N16	Y-Cable Connectors.

Belt Lights

• Running Belt Lights come in 36 ft. lengths • Ideal for outlining stages, etc. Lamp sockets are 4 in. on center • Each belt strip requires 125 Medium base, 5W lamps • Lamp model ZB0EL37 available in Clear, Red, Blue, Green Yellow • Strip runs off of 120V A/C 4 circuit • 120V • C-Belt controller will control up to two belts light strips (sold separately)

Specifications subject to change without notice

*Indicates products available in optional 220v • Most products CSA approved in Canada only!