Series 4000 18-180 Watt Low Pressure Sodium

Construction Features:

Housing: Constructed of heavy gauge, die formed, 5052 aluminum, with less than 1% copper content. Seams are continuously welded and unitized.

Lens/Door Assembly: Constructed of heavy gauge, die formed, 5052 aluminum, with less than 1% copper content. Mitered and welded frame secures the clear polycarbonate lens, sealed to the housing with medium density, closed cell pure neoprene gasket. Door frame attached and secured by stainless steel cam fasteners, which operate without the use of tools, for ease of relamping.

Reflector: Electropolished and anodized high purity aluminum, coilzak or equivalent. Stainless steel lamp support maintains precise alignment of the lamp to the reflector.

Ballast : Constant Wattage Autotransformer (CWA) Core & Coil Ballast, Available in 120, 208, 240, 277 or 480 volt, and Dual-Tap (120//240 or 208/277). Standard mounting supplied prewired to three feet of 16/3 STW-A cord. Cord is secured to enclosure with a watertight strain relief. The optional knuckle slipfitter (KSF) mounting supplied prewired to power leads inside fitter's wiring compartment.

Mounting: Heavy gauge, die formed cold rolled steel yoke, Available with the optional knuckle slipfitter (KSF), providing a cast aluminum alloy (Almag) fitter for standard 2 inch pole tenon mounting (2-3/8 in O.D.).

Hardware: All external hardware is stainless steel, aluminum or hot dip galvanized.

Finish: Polyester powder coated finish, fired at high temperatures to produce a durable weatherproof coating.

Color: Bronze is standard; silver, black and custom color matching is also available. Please consult factory for availability.

ABS Lighting P.O. Box 1847, 83 Water Street, New Haven, CT 06508-1847 Tel: (203) 865-5343 Fax: (203) 773-1019