architecture - engineering - construction
Acudor Products, Inc.
Acudor
Acudor Access Doors - Flush Access Doors - Page 4
Acudor
|
FLUSH
ACCESS DOOR |
|
DESCRIPTION
The Acudor DW-5040 is designed specifically for installation in drywall walls
and ceilings after the drywall has been installed.The flange of the door is a textured galvanized steel taping bead
with pre-punched holes. Drywall compound is applied over the beading at the same time the
drywall joints are finished. When the application is completed, only the door panel
remains exposed. Our unique concealed bar hinge and screwdriver operated cam latches allow
the door panel to operate freely with no binding, sagging or distortion.
SPECIFICATIONS
| Material: |
Steel or Stainless Steel: 14
gage door, 14 gage mounting frame. |
| Door: |
Flush to edge of frame. |
| Frame: |
Flange to be 1 " wide,
mounting frame to have anchor straps. |
| Hinge: |
Continuous, concealed. |
| Latch: |
Stainless steel screwdriver
operated cam latch.
Also available: cylinder lock & key, allen head cam latch, spanner head cam latch. |
| Finish: |
Steel: 5 stage iron phosphate
preparation with prime coat of grey baked enamel.
Stainless Steel: #4 satin polish. |
|
|
DESCRIPTION
The Acudor PS-5030 is designed for installation in plaster walls and ceilings,
before the plaster is applied. An expansion casing bead with 3" wide galvanized lath,
included as part of the frame, provides a clean, tight finish between the frame and
plaster and also adds reinforcement. The door panel is finished flush with the plaster.
Our unique concealed bar hinge and screwdriver operated cam latches allow the door panel
to operate freely with no binding, sagging or distortion.SPECIFICATIONS
| Material: |
Steel or Stainless Steel: 14 gage door, 14
gage mounting frame. |
| Door: |
Flush to edge of frame. |
| Frame: |
Expansion casing bead with 3" wide
galvanized lath, recessed 3/4" to receive plaster. |
| Hinge: |
Continuous, concealed. |
| Latch: |
Stainless steel screwdriver operated cam
latch.
Also available: cylinder lock & key, allen head cam latch, spanner head cam latch. |
| Finish: |
Steel: 5 stage iron phosphate preparation
with prime coat of grey baked enamel.
Stainless Steel: #4 satin polish. |
STANDARD SIZES (special sizes available upon request)
NOMINAL
DOOR SIZE W & H |
CEILING OR
WALL OPENING |
NO. OF
LATCHES |
WEIGHT PER
DOOR DW-5040 or PS-5030 |
INCHES |
mm |
INCHES |
mm |
lbs. |
kg. |
| 8 x 8 |
203 X 203 |
8-3/8 X 8-3/8 |
213 X 213 |
1 |
3.5 |
1.5 |
| 10 x 10 |
254 X 254 |
10-3/8 X 10-3/8 |
264 X 264
|
1 |
4.5 |
2 |
| 12 X 12 |
305 X 305 |
12-3/8 X 12-3/8 |
314 X 314
|
1 |
6 |
2.7 |
| 14 X 14 |
355 X 355 |
14-3/8 X 14-3/8 |
365 X 365
|
1 |
7.5 |
3.3 |
| 16 X 16 |
406 X 406 |
16-3/8 X 16-3/8 |
416 X 416
|
2 |
9.5 |
4.2 |
| 18 X 18 |
457 X 457 |
18-3/8 X 18-3/8 |
467 X 467
|
2 |
11.5 |
5.1 |
| 22 X 22 |
560 X 560 |
22-3/8 X 22-3/8 |
568 X 568
|
4 |
15 |
6.7 |
| 24 X 24 |
610 X 610 |
24-3/8 X 24-3/8 |
619 X 619
|
4 |
19 |
8.4 |
| 24 X 36 |
610 X 914 |
24-3/8 X 36-3/8 |
619 X 924
|
5 |
28 |
12.4 |
|
|
