Case

Approx. 1" x 3-3/8" x 1-5/8" deep. Zinc-aluminum alloy.

Strike Lip

Basic 7100 strike has lip of proper length for 1-3/4" thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, extended lip  available, specified by last dash number. (not available on 7101.)

Fail Safe/Fail Secure

Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

Strike Openings

5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4700 Series deadlatch or cylindrical latches shown with model 7140. See 7160 and 7170 strikes for use with other make mortise latches.

Faceplate

Measures 1-1/4" x 4-7/8". 7100 has flat faceplate; 7101 is reduced to match nose on inactive leaf in a pair of narrow stile glass doors. Available in our full range of architectural finishes.

Function

Remote electrical control of any door equipped with an Adams Rite Series 4500 or 4700 (or similar) deadlatch or "key-in-knob" sets. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-21/32". Fits prep for 7500/7800/7000 Series.

ADAMS RITE MANUFACTURING CO.

4040 S. CAPITOL AVE., P.O. BOX 1301 CITY OF INDUSTRY, CALIFORNIA 91749 (562) 699-0511 FAX : (562) 699-5094