architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Adams Rite Mfg. Co.   Electric Strikes  

Electric Strikes - Page 8

   

Electric Strikes

ELECTRIC STRIKES

 

VOLTAGE
Available in 12, 16 or 24 volt AC and DC. DC and AC Continuous units are silent, AC intermittent  units "buzz" on operation.

CURRENT DRAW/AMPS
Volts AC Int. DC or AC Cont.
12 1.42 .33
16 1.03 .22
24 .74 .17

Case

Approx. 1" x 3-3/8" x 1-5/8" deep. Zinc-aluminum alloy.

Strike Lip

Basic 7140 strikes have lip of proper length for 1-3/4" thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, extended lip  available, specified by last dash number.

Function

Remote electrical control of any door equipped with Cylindrical (key -in-knob/lever) type latchsets listed above. Electrical actuation unlocks strike jaw, releasing latchbolt, so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb sections as shallow as 1-21/32". Fits existing preps for 7840AN and 7850/7040.

Strike Openings

5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of following latchsets:

ARROW 151 (M-SERIES), 1001 (H-SERIES)
BEST 8K SERIES H.D., 50K SERIES M.D.
CORBIN 83,76
DEXTER 7000 H
FALCON X SERIES
KWIKSET 400, 500
P.D.Q. SX SERIES, SH SERIES, SV SERIES
RUSSWIN 400 SERIES, 4000 SERIES, 3000 SERIES
SARGENT 2 LINE, 3 LINE, 6 LINE, 8 LINE, 9 LINE
SCHLAGE SERIES A, B*, C-D, E, F, & H
WEISER SERIES E & X
YALE 5000 SERIES
*Applicable only with 1/16" or more gap between door and jamb.

Faceplate

Measures 1-1/4" x 4-7/8". Faceplate is flat, with square corners.  Available in our full range of architectural finishes.

Fail Safe/Fail Secure

Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.

ADAMS RITE MANUFACTURING CO. 4040 S. CAPITOL AVE., P.O. BOX 1301 CITY OF INDUSTRY, CALIFORNIA 91749 (562) 699-0511 FAX : (562) 699-5094



Request for Information / Request a Catalog from Adams Rite Mfg. Co.
 
 
 
To request more information from Adams Rite Mfg. Co., please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.