Surface vertical Rod

Alarmed Exit Device

• Self contained battery operated alarm
• Battery operated alarm with external leads for remote speakers, signal lights or override switch
• Hardwired alarm with battery backup
• Alarm/delayed egress available with 15 or 30 second delay

Electric Exit Device

• Remote control entry access
• Remote control & monitoring

Monitor Signal Switch

Cylinder Dogging

Not available for fire-rated.

Surface Vertical Rod Exit Devices shall be as manufactured by Adams Rite. Top latch and strike shall interlock door to frame with Adams Rite's patented interlocking latch mechanism. Exit device shall be made of extruded aluminum pushbar and back bar. Finishes shall be anodized aluminum or clad in architectural finishes. No plating shall be used Pushbar travel shall be one inch towards door surface. No plating shall be used. Pushbar shall be one inch towards door surface. All bar mounting fasteners shall be hidden.

Rods shall be protected by covers in a finish to match the exit device pushbar. The top latch and bottom bolt shall have protective covers in a finish to match the exit device pushbar.

The 8000 Series exit devices shall be U.L. listed for Life-Safety. The 3000 series exit devices shall be U.L. fire-rated for three hours for openings of 8'0" x 8'0" and Warnock Hersey listed for openings of up to 8'0" x 10'0".

All exit devices shall meet ANSI/BHMA requirements for Grade I.