Exit Device Entry Trim

Mortise Cylinder - 4036-01

Standard diameter five-pin unit with MS cam, suitable for use with Mortise devices simply by installing in latch case. Installation with Concealed Vertical Rod devices requires 8650 Escutcheon. All brass construction with front "scalp" available in finishes 628, 313, 335, 605 and 612. Available in quantity all keyed different (KD), in pairs (KA2) or fifty alike (KA50). Any other make standard Mortise cylinder with MS cam can be used to "key in" with existing systems.

Rim Cylinder - 8736

Standard five-pin unit with spindle to suit Rim devices and Surface Vertical Rod devices. All brass with same choices of keying as Mortise cylinder. Available in finishes 628, 313 or 335. Any other make standard Rim cylinder can be used to key in with existing systems. Note that if entry trim is specified for cylinder must be Mortise type, regardless of exit device.

Escutcheon - 8650

Required to mount any make standard Mortise cylinder, with MS can, on outside of door. Also required when specifying CVR devices with a cylinder.* Specify finish being matched when ordering.

*Not available for 3676,3900 or 8900.