architecture - engineering - construction
Adams Rite Mfg. Co.
Sliding Door Hardware
Sliding Door Hardware - Page 8
Sliding Door Hardware
DEADLOCK
OR LATCH SERIES |
MS1847 |
| ANSI/BHMA TYPE E8291
FUNCTION:
A compact lock to fit within very narrow sliding
door stiles without compromising in any way the high degree of security these doors need.
The sturdy stainless steel bolt has two important features not usually found in sliding
door hardware. First, it is adjustable: A full 3/16" lengthening or shortening of
bolt projection is possible by turning an exposed screw in the face of the lock. This can
compensate for a considerable misalignment between door and jamb. Secondly, the MS1847
bolt is a self-projecting. If the door is closed with bolt in locked position, the bolt
will retract immediately on contact accidental lock-out.
OPTIONS:
Hub position, Face end shape, and lock or latch
function are specified by dash number. See table next page.
LATCH
VERSION
The same stainless steel hookbolt, but spring-loaded for
automatic latching is provided by the MS1847-08, MS1847-11, MS1847-13 and MS1847-16. All
dimensions and available accessories for MS1847 lock also apply to MS1847 latches. |
STANDARD
PACKAGE
Case-packed with machine screws for mounting. Shipping
weight: 1/3 lb. |
* Also available in zinc-plated steel.
(Specify Series MS1848 instead of MS1847.)
©1967, 1972, 1974, 1975, 1987 by |
ADAMS RITE
MANUFACTURING CO. |
 |
4040 SOUTH
CAPITOL AVENUE POST
OFFICE BOX 1301, CITY OF INDUSTRY, CALIF. 91749 |
TELEPHONE: (562) 699-0511 • FAX: (562)
699-5094 |
