LOCK TRIMPLATE

FUNCTION:

Allows mortise of MS1847 series locks or latches into wood sliding doors. Lock hub position is equidistant from ends of plate to allow unhanded stile preparation. HOW TO ORDER

HOW TO ORDER

Specify QUANTITY and CATALOG NUMBER 4805

	MATERIAL Zinc alloy. TRIM FINISH Zinc (675). For other finishes, contact factory.
	COMPATIBLE LOCKS & LATCHES MS 1847 LOCK MS 1847-10-LOCK MS 1847-04 LOCK MS 1847-13 LATCH MS 1847-08 LATCH (See Page SL-8.)

STRIKE SERIES

FUNCTION:

With vertical adjustment to accommodate door/jamb misalignment and a shim system for horizontal positioning to match various jamb bumper designs, Series 4800 strikes can be fitted to nearly any sliding door using a mortised MS1847 series lock or latch. 4801 strikes are furnished with sheet metal screws for metal jamb installation. 4802 strikes are furnished with machine screws and tee nuts which are installed on the back side of jamb to provide the strongest possible anchorage in wood.

HOW TO ORDER

Specify CATALOG NUMBER (4801 for metal jambs and 4802 for wood jambs) plus DASH NUMBER which indicates number of shims for projection of strike from jamb (see table next page).

MATERIAL Steel, heat treated. Shims are ABS plastic. Zinc (603). For other finishes contact factory.
4801-01 (ACTUAL SIZE)   STANDARD PACKAGE Individually packaged in envelope with screws and shims (if required). Shipping weight: 1/8 lb.

©1969, 1972, 1974, 1976, 1978 by

POST OFFICE BOX 1301, CITY OF INDUSTRY, CALIF. 91749