 |
| MS 1850S
Deadbolt |
INCHES
MILLIMETERS
Nominal, subject to tolerance extremes.
Cylinder Cam
MS 18505S Series locks are operable by any standard
1-5/32" diameter mortise cylinder with special MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained from most cylinder
manufactures. See page SW-30 for cylinder make and trim ring
information.
Specify quantity and the following information.
Order related hardware separately.
* Any flat or radius face, except Schoolhouse.
For jambs too narrow to accept the long bolt, the MS
1850S-050 offers a shorter bolt with hook shape to provide equal security against
door-prying attempts. (See catalog page SL-1.) 1850S-020 short
throw without hook also available. Second and third point locking bolts are available for
pairs of doors. (See pages SW-11 and SW-12.)
All use any make standard mortise cylinder and thus can be keyed into systems with other
types of doors. "SCHOOLHOUSE" version, also available, is modified so that
operation from inside in "unlock only". This lock is handed and must be
specified LH or RH. Specify Series SCH 1850S. Same faceplate and backseat options as
Series MS 1850S. Operation from inside, with standard Adams Rite 4066 Turn seen on page
SW-30. For wood or hollow metal, see MS1850SN.
Individually boxed with machine screws for mounting.
Cylinders and/or thumbturn available at extra cost. Shipping weight: 1-1/2 lbs. Also
available in a 25 unit pack for volume users. |
