 |
| SWINGING
DOOR HARDWARE |
Cylinder Backset
1-1/2" only.
Case
Steel with corrosion-resistant plating. 1" x 6" x
2-1/4".
Function
For hollow metal or wood doors prepared for hardware
according to the specifications of the American National Standards Institute, this MS®
deadbolt provides maximum security and ease of installation. Its standard 1-1/2"
backset dimension provides adequate clearance for the deep stop on the door jamb of hollow
metal entrances.
Bolt
5/8" x 1-3/8" x 2-7/8" with 1-3/8"
throw. Eight ply laminated stainless steel. Center ply has Alumina-Ceramic core to defeat
any hacksaw attack, including rod-type "super" hacksaws.
Strike
Available in lipped, ANSI-spec version in steel with Chrome
or Brass finish. See back page for dimensions of strike slot which can be cut in metal
jamb. Other strikes are also available. (See page SW-16).
Operation
360° turn of key or thumbturn throws or retracts the
counterbalanced bolt. Key can be removed only when bolt is in a positively locked or
unlocked position. Lock accepts any standard 1-5/32" mortise cylinder from either or
both sides. Cylinder must have MS® cam. (See page
SW-30).
ADAMS RITE
MANUFACTURING CO. |
 |
4040 S. CAPITOL AVE., P.O. BOX 1301
CITY OF INDUSTRY, CALIFORNIA 91749
(562) 699-0511 FAX: (562) 699-5094 |
|
