 |
| MS 1850SN
ANSI Size Deadbolt |
INCHES
MILLIMETERS
Nominal, subject to tolerance extremes.

Cylinder Cam

MS 18505SN Series locks are operable by any standard
1-5/32" diameter mortise cylinder with special MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained from most cylinder
manufactures. See page SW-30 for cylinder make and trim ring information.


Specify quantity and the following information.
Order related hardware separately.

Second and third point locking bolts are available for
pairs of doors. (See pages SW-11 and SW-12.)
Shorter "hookbolt" version also available.(See page SL-3).All
use any make standard mortise cylinder and thus can be keyed into systems with other types
of doors. "SCHOOLHOUSE" version, also available, is modified so that operation
from inside in "unlock only". This lock is handed and must be specified LH or
RH. Specify Series SCH 1850SN. Operation from inside, with standard Adams Rite 4066 Turn seen on page SW-30. MS1850SN.
Individually boxed with machine screws for mounting.
Cylinders and/or thumbturn available at extra cost. Shipping weight: 1-1/2 lbs. Also
available in a 20 unit pack for volume users. |