SWINGING DOOR HARDWARE

Cylinder Backset

Available in 31/32" 1-1/8" or 1-1/2".

Case

Steel with corrosion-resistant plating. 1" x 7-3/8" x depth. (Depth varies by backset. See table on back page.)

Latch Bolt

5/8" x 5/8" with 7/16" throw. Zinc alloy with Delrin face for smooth, quiet action. Handing easily reversible, Bolt can be held fully retracted to allow door to be free swinging. (See back page.)

Function

Deadbolt Maximum Security after hours plus traffic control convenience for management during the business day. Typical installation is a bank or store requiring three modes of door control:

1. Both lock and latch bolts retracted for unrestricted entry and exit during business hours,
2. Handle-operated latch for exit-only traffic just after closing, and
3. Maximum Security hookbolt for overnight lockup.

NOTE: Handle or paddle operates latchbolt only.

Lock Bolt

5/8" x 1-3/8" with 13/16" throw. Eight ply laminated stainless steel. Center ply has Alumina-Ceramic core to defeat any hacksaw attack, including rod-type "super" hacksaws. Hook shape repels prybar attempts.

Armored Strike

Satin stainless steel trim plate with steel mounting plate and dust box. Flat strike (shown) furnished. Also available for pairs of doors in radius shape, or flat with square corners for ANSI hollow metal jambs. Flat strikes also available with longer lip. (MS+1890 Deadbolt/Latch cannot be used with electric strikes).

Operation

360° turn of key or thumbturn throws or retracts the hook-shaped deadbolt. 120° further turn retracts latch bolt as well. Cylinder may be any make standard 1-5/32" mortise type with MS^® cam. Handle retracts springs spring-loaded latch bolt only.

ADAMS RITE MANUFACTURING CO.

4040 S. CAPITOL AVE., P.O. BOX 1301 CITY OF INDUSTRY, CALIFORNIA 91749 (562) 699-0511  FAX: (562) 699-5094