MS + 1890 Deadbolt/Latch

INCHES
MILLIMETERS
Nominal, subject to tolerance extremes.

Cylinder Cam

MS+1890 Series locks are operable by any standard 1-5/32" diameter mortise cylinder with special MS^® cam dimensioned as shown. Cylinders with MS^® cams can be readily obtained from most cylinder manufactures. See page SW-30 for cylinder make and trim ring information.

Specify quantity and the following information.
Order related hardware separately.

Order handle for one side only or both sides. Handles on both sides solve, with minimum traffic impediment, the problem of doors that stand ajar due to wind or air-conditioning pressures.

Individually boxed with machine screws for mounting. Cylinders available separately at extra cost. Shipping weight: 2 lbs.