SWINGING DOOR HARDWARE

Cylinder Backset

Minimum backset is approx. 2-1/4" for the MS 1861-01, with vertical  bolt only. The MS 1861-02, with vertical and horizontal bolt, requires placement of cylinder centerline 5-3/4" from nose of door. Both have cylinder center 1-7/8' above bottom edge of door.

Case

Steel with corrosion-resistant plating. 1" x 6" x 1-1/16".

4014 Conversion Kit

To convert MS 1861-01 to MS 1861-02, Kit 4014 provides horizontal bolt assembly with guide and attachment fittings.

Function

Using the same overcenter/pivot locking mechanism as the basic MS^® deadbolt, the MS 18161 lies horizontally in the bottom rail of ultra-narrow stile doors, which have insufficient vertical space for a lock and tempered glass doors, which have no stile at all. The hardened steel cylindrical bolts allow simple drilled strike holes of a relatively small size to minimize the nuisance and danger presented by some threshold strikes in collecting debris and catching women's heels. MS1861-02 locks either single-leaf or paired doors.

Bolts

3/8" diameter. Stainless steel vertical threshold bolt has 13/16" throw. Hardened steel horizontal bolt has 1-1/8" throw.

Strikes

In metal installations, 7/16" drilled holes in threshold are required. For MS 1861-02, drilled holes are also required in jamb or opposite door. For wood, metal plate with 7/16" hole must be provided for each bolt.

Operation

360° turn of key or thumbturn throws or retracts the header and threshold  bolts. Key can be removed only when bolt are in a positively locked or unlocked position. Lock accepts any standard 1-5/32" mortise cylinder from either or both sides. Cylinder must have MS^® cam. (See catalog page SW-30).

ADAMS RITE MANUFACTURING CO.

4040 S. CAPITOL AVE., P.O. BOX 1301 CITY OF INDUSTRY, CALIFORNIA 91749 (562) 699-0511  FAX: (562) 699-5094