MS 1861 Bottom Rail Deadbolt

INCHES
MILLIMETERS
Nominal, subject to tolerance extremes.

UNIT ILLUSTRATED IS 1861-02 (BOTH HORIZONTAL & VERTICAL BOLTS INCLUDED.)

CATALOG NUMBER FOR VERTICAL BOLT OPERATION ONLY IS MS 1861-01.

CONVERSION KIT NO.4014 AVAILABLE TO CONVERT MS 1861-01 TO MS 1861-02. SEE BELOW:

4014 Conversion Kit

The 4014 Conversion Kit consists of

1. Arm & Bolt assembly
2. Assembly Pin
3. Bolt Guide Bracket
4. Mounting Screws

To assemble, press pin through disc and arm.

Cylinder Cam

MS 1861 Series locks are operable by any standard 1-5/32" diameter mortise cylinder with special MS^® cam dimensioned as shown. Cylinders with MS^® cams can be readily obtained from most cylinder manufactures. See page SW-30 for cylinder make and trim ring information.

BOTTOM DOOR RAILS WITH WEB WILL REQUIRE MACHINING AS SHOWN ABOVE. POSITION OF WEB WILL DETERMINE TUBE SPACER REQUIREMENT AND TUBE SPACER LENGTH.

Specify quantity and the following information.
Order related hardware separately.

Individually boxed with machine screws for mounting. Cylinders and/or thumbturn available at extra cost. Shipping weight: MS 1861-01: 1-3/4 lbs., MS 1861-02: 2 lbs.