1830 Bottom Rail Deadbolt

Swing Bolt

INCHES
MILLIMETERS
Nominal, subject to tolerance extremes.

Cylinder Cam

1830 deadbolts are operable by any standard 1-5/32" diameter mortise cylinder with special MS^® cam dimensioned as shown. Cylinders with MS^® cams can be readily obtained from most cylinder manufactures. See page SW-30 for cylinder make and trim ring information.

Specify quantity and the following information.
Order related hardware separately.

Specify either 31/32" or 1-1/8" cylinder height. Order 4006 strike and cylinder (s) separately if required.

Individually boxed with machine screws for mounting. Cylinders and/or thumbturn available at extra cost. Shipping weight: 1-1/2 lbs. Also available in a 25 unit pack for volume users.