 |
| SWINGING
DOOR HARDWARE |
Cylinder Backset
7/8" , 31/32" or 1-1/8" only.
Case
Steel with corrosion-resistant plating. 1" x 6" x
depth. (Depth varies by backset. See table on back page.)
Function
For installations where the long-throw MS®
Deadlock cannot be accommodated, the smaller 4070 offers the longest practical throw for a
conventionally projected bolt from a narrow stile. Operates with one-half key turn of any
standard mortise type cylinder or cylinder type thumbturn. NOT TO BE USED IN BOTTOM RAIL.
Bolt
5/8" x 1-1/48" x 5/8" throw.
Strike
In metal installations, a slot in jamb serves as strike.
Deluxe trim strike 4170 is also available for wood installations.
Operation
180° turn of key or thumbturn projects or retracts the
bolt. Accepts any standard 1-5/32" mortise cylinder from either or both sides.
Cylinder must have cam to fit. (See catalog page SW-30)
ADAMS RITE
MANUFACTURING CO. |
 |
4040 S. CAPITOL AVE., P.O. BOX 1301
CITY OF INDUSTRY, CALIFORNIA 91749
(562) 699-0511 FAX: (562) 699-5094 |
|
