 |
| MS4043
Cylinder Guard |
INCHES
MILLIMETERS
Nominal, subject to tolerance extremes.
* Contact factory regarding non-standard
dimensions.
FACE "OPEN SIDE OF RETAINER TOWARD MINIMUM CLEARANCE
DIRECTION (TOWARD NOSE OF DOOR ON 7/8" OR 31/32" BACKSET LOCKS, AWAY ON
1-1/8" BACKSET).
NOTE: GUARD MAY BE USED ON OUTSIDE ONLY OR ON BOTH OUTSIDE
AND INSIDE OF A DOUBLE-CYLINDER LUCK
Specify quantity and the following information.
Specify Ritecoat color if other than standard.
MS4043 fits standard 1/8" stile wall. For 1/4"
thick stile wall, specify MS4043-01. See page SW-30 for cylinder information.
Individually packaged with spacers for flush fitting in
thin stile walls. Cylinders available at extra cost. Shipping weight: 1/8 lb. |
