|
|
Adams Rite Mfg. Co.
Swinging Door Hardware
Swinging Door Hardware - Page 28
Swinging Door Hardware
4000 Trim Strike A simple strike plate that can be surface mounted on a wood or metal jamb or mortised flush. Furnished with two #10 flat head machine screws and two #10 flat head wood screws. MATERIAL /FINISH: Made of aluminum. Available in US28 (628) Satin Aluminum, anodized. Also anodized in 313 and 335. Contact factory for other available finishes. 4001 Box Strike Same trim plate as 4000 but with dust box added. Customarily used only for wood construction where the dust box prevents chips, sawdust and other debris from entering strike. Also furnished with both wood and machine screws. MATERIAL/FINISH: Trim plate is aluminum, box is steel plated for corrosion resistance. Available in US28 (628) Satin Aluminum, anodized. Also anodized in 313 and 335. Contact factory for other available finishes. MS4002 Armored Strike Same trim plate as 4000, but backed up by a massive steel doubler designed to prevent the method of forced entry known as "jamb peeling." Fits within aluminum or other hollow jamb sections with trim face flush, the steel completely hidden. Available flat or radiused, for pairs of doors*, and to fit all MSŪ deadbolts including the hookbolt version in sliding doors. (Hookbolt use dictates door/jamb gap of 1/8" or less.) Unhanded, may be used with RH or LH swinging or sliding doors. MATERIAL/FINISH: Trim plate is aluminum. Reinforcement doubler is steel plated for corrosion resistance. Available in US28 (628) Satin Aluminum, anodized. Also anodized in 313 and 335. Contact factory for other available finishes. *Can be used with two-point and three-point MSŪ locks. Function The majority of Adams Rite MSŪ deadbolts are installed in metal construction where the strike cutout can be simply a slot in the jamb. However, for aesthetic reasons or, in the case of the MS4002, for added security, many who specify the MSŪ deadbolt add one of these strikes.
|
