1870 Series Flushbolt

INCHES

MILLIMETERS

Nominal, subject to tolerance

Cylinder Cam

1870 Series locks are operable by any standard 1-5/32" diameter mortise cylinder with special MS® cam dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See page SW-30 for cylinder make and trim ring information.

Specify quantity and the following information. Order related hardware separately.
*Any flat or radius face.

Basic lock mechanism boxed with actuator arm attached, rod/bolt assembly unattached. Stainless steel bolt guide, mounting screws and installation instructions included cylinders available at extra cost. Shipping weight: 1-1/4 lbs.