 |
| SWINGING
DOOR HARDWARE |
Cylinder Backset
7/8", 31/32", 1-1/8" or 1-1/2" only.
Case
Steel with corrosion-resistant plating. 1" x
5-13/16" x depth. (Depth varies by backset. See table on back
page.)
Function
Flexibility of traffic control during and after business
hours is offered by 4710 Series Deadlatches. A reverse turn of the key while bolt is held
retracted retains the bolt, to allow two way traffic for hospitals, banks, stores and other
buildings which require free entrance at certain times and exit-only at other times.
Interchangeable, without stile modification, with any MS1850A or MS1850S deadbolt of same
backset and faceplate shape. (They do not, however, provide the same maximum security
level as the MS® Deadbolt.)
Latch Bolt
1/2" x 1" 1/2" throw. All metal with
hardened steel internal pins. Handling is easily reversible without special tools.
Auxiliary Bolt
All metal. Deadlocks latch bolt to prevent
"loiding" or case-knife entry.
Strikes
Standard strike furnished is 4502-01 for jamb where door
closes flush or nearly flush. Also available: radius strike for opposite stile in paired
doors; longer strike (4501) to cover slot strike of MSŪ lock; long lip strikes section).
Operation
Turn key or operate handle to retract spring-loaded latch
bolt. To hold bolt retracted, push it in and secure by reverse turn of key (see back
page.) Uses any standard mortise cylinder with MSŪ cam (see page SW-30)
ADAMS RITE
MANUFACTURING CO. |
 |
4040 S. CAPITOL AVE., P.O. BOX 1301
CITY OF INDUSTRY, CALIFORNIA 91749
(562) 699-0511 FAX: (562) 699-5094 |
|
