 |
| 4720AN
Series Deadlatch |
INCHES
MILLIMETERS
Nominal, subject to tolerance extremes.
Cylinder Cam
4720AN Series Deadlatches are operable by any standard
1-5/32" diameter mortise cylinder with special MSŪ cam dimensioned as shown.
Cylinders with MSŪ cams can be readily obtained from most cylinder manufacturers. See page SW-30 for cylinder make and trim ring information.
Specify quantity and catalog number.
Order related hardware separately.
Bolt Holdback
A reverse turn of the key (while bolt is held fully
retracted) retains the bolt, allowing the door to be free swinging.
Door Nose Shape, Finish, Strike and Handing must be
specified when ordering. For Handles, see page SW-27 & 28. For Paddles, see page SW-29.
Individually boxed with strike and machine screws for
mounting. Cylinders, paddle or handle available at extra cost. Shipping weight:
1-1/4 lbs. Also available in a 20 unit pack for volume users. |
