| Guide Specifications: Part- I
System Description
Provide a Compact Wall Mounted Infant Changing Table to
include: safety straps and integral sanitary liner dispenser. Changing table
to drop horizontally and be able to withstand a static weight of 400 lbs.
in the open position.
Warranty
Five-year warranty on all parts from defects in
workmanship. Upon the notification and return of defective part(s) within warranty
period, the Company shall repair or replace any of the defective part(s) or at its option
may replace entire unit. This warranty expressly excludes the breakage, damage or
total destruction of any and all parts exposed to abuse, vandalism, acts of violence, or
improper installation. In cases of vandalism or misuse, front or back
replacement parts are availlable for $60.00 plus shipping and
handlling. For replacement parts, contact the office listed below. Customer
is responsible for maintenance of all safety features; safety straps, mounting, hinges,
liner covers, etc.
Part 2 - EXECUTION
Mounting requirements: Wood screws
or toggle bolts both require a sound plumb, vertical wall structure in which to mount the "Diaper
DeckTM". Under no circumstances
should the "Diaper DeckTM" be mounted on a wall not able to
withstand a minimum of 100 lbs. per sq. ft. in all directions. It must be
consistent with all local, as well as national codes, ordinances, and regulations
relating to such an installation.
Location & Clearances: The
bottom of the unit in its open position should be approximately 34" from the finished
floor to insure comfort and safety of end user. It must be at least 4" away
from any grab rail so as not to interfere with the rails use. The "Diaper
DeckTM" must be mounted in accordance with
all building codes, regulations and ordinances relating to clearance as determined by the
location of each particular installation. As you can see in the drawing below, the
overall length is 32" and the mounting height should be 34" from the finished
floor to bottom of deck in the open position. Specify ADA model if
applicable.
Easy Installation: A "Diaper
DeckTM" installation kit is provided with
the deck; it consists of mounting hardware, installation instructions, a Graphic Design
door label and a few of the sanitary bed liners. This kit is located inside the
lockable liner dispenser located in the upper half of the deck. Complete
installation instructions allow for proper installation of the "Diaper
DeckTM" in a short amount of time.
The instructions include a list of the hardware provided and a suggestion of the tools to
be used. As there can be many varieties in wall construction, materials, and designs
we have provided the mounting hardware that is appropriate for your particular
installation. If mounting hardware is inappropriate for installation, appropriate
hardware must be obtained by the installer.
Partial
List of Facilities Equipped with "Diaper DeckTM":
- Sears
- TGI Friday's
- Red Lobster
- Hardee's
- Discovery Zone
- Religious Facilities
- Melvin Simon Malls
- Burger King
- Macy's
- Ground Round
- Airports
- K-Mart Stores
- Mall of America
- Chi-Chi's
- Cub Foods
- McDonald's
- Day Care Centers
- Hospitals
- Wendy's
- Arby's
- Saks Fifth Ave.
- General Growth Malls
- Clinics
- Target Stores
Manufactured by: Distributed by:
AMERICAN INFANT CARE PRODUCTS, INC.
PH # 507-263-5354 FAX # 507-263-5350
6352 320TH STREET WAY
P.O. BOX 128
CANNON FALLS MIN 55009 |
