Undercabinet & Linear Lighting - Page 16

Undercabinet and Linear Lighting Solutions

Translucent Diffuser Provides uniform, well diffused light spread.	Opaque Front Task Lens (optional)-The clear linear prism bottom results in approximately 30% more footcandles on the work surface. A co-extruded opaque white front eliminates front-edge fixture brightness, especially desirable when fixture can be viewed at eye-level.
Tri-Level Dimming (optional)-A 3-position rocker switch and special ballast allows reduction from 100% to 70% or 50% of full light output. (Available on 3’ and 4’ Octron models.)

Ordering Information
Super Inch
Cat. No.	Lamps	Length	Avg. FC*
105-PL	1/PL-13W	12 3/8"	26
115-PL	2/PL-13W	18 1/8"	46
115-S	1/T8-15W	18 1/8"	20
215-S	1/T8-30W	36 1/8"	40
317	1/T8-17W	24 1/8"	41
325	1/T8-25W	36 1/16"	56
332	1/T8-32W	48 1/8"	65
Optional Equipment (add as suffix)
Opaque front task lens			/OF
Fixture mounted rocker switch			/RSW
White grounded convenience outlet			/CO-W
6’ White U.L. labeled 3-wire cord set			/CS3W
Electronic Ballast**			/ECB
277 Volt Electronic Ballast**			/277ECB
Dimming Ballast/Special fixture mounted switch for high, medium or low light level selection (available for 325 & 332 only)			/3 DIM
Consult specification binder for additional options
For stainless steel construction, prefix catalog number with "SS." Example: SS215-S
*Fixture mounted 15" above work surface. For "OF" lens multiply by 1.3.
**Electronic ballast only available on 317, 325 & 332.

---

Prismatic Diffuser Provides uniform, well diffused light spread.	45° Lateral Prism Lens (optional)-Prisms oriented perpendicular to the lamp block out direct lamp image glare and distribute light laterally to reduce veiling reflections.	Hex-Cell Mini-Louver (optional)-Eliminates apparent fixture brightness from virtually any viewing angle and restricts light spread to directly underneath the fixture.
High Abuse Model (SFS Series)-16 gauge steel and polycarbonate prismatic slide in ¼" diffuser retained by a removable front with tamper resistant screws. Withstands abuse and prevents unauthorized entry.	Tri-Level Dimming (optional)-A 3-position rocker switch and special ballast allow reduction from 100% to 70% or 50% of full light output. (Available on 3’ and 4’ Octron models.)

Ordering Information
Solid Front Super inch Standard (SF series)
Cat. No.	Lamps	Length	Avg. FC*
SF115-S	1/T8-15W	18 1/8"	30
SF215-S	1/T8-30W	36 1/8"	58
SF317	1/T8-17W	24 1/8"	43
SF325	1/T8-25W	36 1/8"	58
SF332	1/T8-32W	48 1/8"	67
High Abuse (SFS series)
SFS-115	1/T8-15W	18 1/8"	30
SFS215	1/T8-30W	36 1/8"	58
SFS317	1/T8-17W	24 1/8"	43
SFS325	1/T8-25W	36 1/8"	58
SFS332	1/T8-32W	48 1/8"	67
Optional Equipment (add as suffix)
Rocker switch			/RSW
White grounded convenience outlet			/CO-W
6’ White U.L. labeled 3-wire cord set			/CS3W
Electronic Ballast**			/ECB
277 Volt Electronic Ballast			/277ECB
Dimming Ballast/Special fixture mounted switch for high, medium or low light level selection (available for 325 & 332 only)			/3 DIM
45° Lateral prism lens (not available on "SFS" series)			/BW
Hex cell louver (not available on "SFS" series)			/HCL
Consult specification binder for additional options
*Fixture mounted 15" above work surface.
**Electronic ballast only available on 317, 325 & 332.