1 - Universal end-feed allows 3/8" flexible metal conduit to be field-located out the end, front, or back for connection to the remote ballast.

2 - Slide-on mounting clip simplifies installation.

3 - T2 sub-miniature lamp delivers high color rendering with minimal heat generation and long service life.

4 - Specular hammer-tone reflector provides shadow-free illumination and controlled asymmetric light distribution.

OPTIONAL GLASS SHELVING FASCIA
	Accessory fascia extrusion attaches to 3/8" or 1/2" glass shelves. Standard Slite luminaires simply slide into the back of the extrusion to achieve a continuous appearance with field cut-to-length dimensions. Available in painted and anodized finishes.

ORDERING INFORMATION
Slite Luminaires
(Supplied with 3000 K lamps installed in fixture)
Catalog Number	Lamps	Length	Total Lumens	Rated Life
SL111	1-11W	20 1/4"	680	10,000 hours
SL113	1-13W	24 1/4"	860	10,000 hours
SL211	2-11W	37 1/4"	1360	10,000 hours
SL213	2-13W	45 1/4"	1720	10,000 hours
Wiring Style
/DW	For permanent direct-wiring with flexible metal conduit
/CS-3W	Supplied with UL listed 6' grounded cord and plug
Left/Right Luminaire Wire Exit (location as you face shelf)
/L	Wire exiting from left end of Slite luminaire
/R	Wire exiting from right end of Slite luminaire
Finishes
/WH	White
/B	Black
/ES	Etched Silver Anodized
Special Order Finishes
/PS	Polished Silver Anodized
/PG	Polished Gold Anodized
Optional 4100K lamps
/4K
Optional Electrical Feature
/2	(2) single lamp Slite luminaires supplied with (1) two-lamp ballast (only available with SL111 and SL113 single lamp Slite luminaires)
/QD	Quick disconnect plug for luminaire to ballast connection (available on portable CS-3W models only. Luminaire-to-ballast wire cable length must be specified.)
Optional Fascia For 3/8" or 1/2" Thick Glass Shelves (ordered separately, specify finish as listed to left)
GSF-4	4' Glass Shelf Fascia extrusion
GSF-8	8' Glass Shelf Fascia extrusion
Direct Wired Fixture with Ballast Slite luminaires for permanent wiring are supplied with 8' of lead wire and an electrical fitting to accept 3/8" flexible metal conduit (by others) for attachment to the remote ballast enclosure. Single lamp Slite luminaires can also be ordered in pairs to operate off a single 2-lamp ballast. Portable Fixture with Ballast and Plug Slite luminaires for portable installations are supplied with 8' cord out the end for wiring to a remote ballast enclosure. The ballast enclosure is supplied with a 6' grounded cordset to plug into any convenience outlet.
Slite ballasts may be remote mounted up to 8' from the luminaire. Care should be taken when selecting a ballast location to ensure adequate ventilation so ambient temperature will not exceed 40 degrees C.

Slite^® lighting fixtures are available in North America exclusively from Alkco, under a licensing agreement with Intralux Australia PTY Limited.