| 
|
- Remove old doorframe with diffuser. Raise light
fixture and shift to the side.
|
Place new Kwik Change™ system on existing ceiling
grid. Lift and shift inner frame and swing down.
|
|
|
- Reach through open panel and replace light fixture on top of
Kwik Change™
Retrofit System. To close, swing up inner frame and lift and shift to secure in position.
|
KWIK CHANGE RETROFIT SYSTEMS are
available with the following louver options:
- Para-Lite 1 Specular Finish Parabolic Louver.
1/2" x 1/2" x 1/2" cell size.
- Para-Lite 2 Specular Finish Parabolic Louver.
1-1/2" x 1-1/2" x 1" cell size.
- Para-Lite 3 Specular Finish Parabolic Louver.
3/4" x 3/4" x 1/2" cell size.
- Para-Lite 4 Specular Finish Parabolic Louver.
3/4" x 3/4" x 1/2" cell size.
- Para-Lite 5 Specular Finish Parabolic Louver.
3/4" x 3/4" x 3/8" cell size.
- Hexabolic Specular Finish Parabolic Louver.
3/4" x 3/4" x 1/2" cell size.
- CRT Specular Finish Parabolic Louver with high transmission
or frost overlay.
3/4" x 3/4" x 1/2" cell size.
- Deco-Round 33 Specular Finish Parabolic Louver.
1-3/8" x Cone in 1-7/8" Cube.
- ALP-12/120 Clear Prismatic Lens.
- PLLA Aluminum Parabolic Louver - 1-1/2" Deep Cell
- PLTA Aluminum Parabolic Louver - 2" Deep Cell
- PLDA Aluminum Parabolic Louver - 3" Deep Cell
Specifications
Easily retrofit most fluorescent lighting fixtures with a
more efficient and modern parabolic louver without special cutting, notching or custom
installation.
Kwik Change™ is an efficient and simple method for
replacing old, dirty or glare-producing lighting diffusers with modern parabolic louvers.
The system requires no special tools, no rewiring and no special maintenance once it is
installed. The system is designed to retrofit most standard lay-in 1' x 4', 2' x 2' and 2'
x 4' lighting fixtures.
Kwik Change™ may be used in any standard ceiling grid
system. It is adaptable to ceiling systems where lighting troffers have been laid into the
grid so they are easily shifted during the installation process. The Kwik Change™
System utilizes a family of parabolic louvers, lenses and diffusers.
Visit our Web Site at WWW.ALP-LTG.COM
AVOIDA-NOTCH™ FRAMING
(For use with PARA-LITE 1, 2, 3, 4 and 5; DECO-ROUND 33;
DECO-ROUND 50; HEXABOLIC™ 2 and PLASTIC LOUVERS)
The Avoida-Notch™ framing flange can adapt the louver to fit most standard
fluorescent lighting fixtures. This product eliminates the necessity for louver notching.
Using this product in an inverted mounted position, allows for the installation of
parabolic louvers in shallow profile lighting fixtures with limited doorframe height
clearance.
The inverted mounting method also provides an unusual
accent or frame feature for lighting fixtures. Inverted Avoida-Notch™ available in Black or
White only.
In lighted ceilings the use of the Avoida-Notch optional
frame in an inverted position creates an interesting perimeter reveal for ceiling
applications. |
