High Efficiency Hexagonal Design

Products listed above are polystyrene. For Acrylic Louvers, add A after catalog number. DURABOLIC Finish available on specular Silver only. To order, replace SPS with DSPS. For other finishes replace SPS with SPG for Specular Gold* or SSS for Semi-Specular Silver.

*DURABOLIC Finish is standard on Specular Gold.

Specifications

Louvers shall be Hexabolic 2 as manufactured by A.L.P. Lighting & Ceiling Products, Inc. and shall be injection molded of polystyrene or acrylic with all parabolic surfaces prepared with a primary undercoat and highly specular vacuum metalized finish.

The cells shall be hexagonal in shape with each vertical wall a parabolic curve having its focus along the edge of the apposite parallel wall and a height of 1/2". Cell size opening to be 9/16" back opening and 11/16" front opening. This allows more light through the louver for increased efficiency. Cell dimensions shall be 3/4" x 3/4" x 1/2" and shall provide 40° shielding with a louver efficiency of not less than 47.8% (Specular Silver), and has a VCP rating of .99.

Visit our Web Site at WWW.ALP-LTG.COM

DECO-ROUND 33

DECO-ROUND 50

Products listed above are polystyrene. DURABOLIC is optional finish available on specular Silver only. To order, replace SPS with DSPS. For other finishes replace SPS with SPG for Specular Gold* or PSB for Specular Silver/Black combination.

*DURABOLIC Finish is standard on Specular Gold.

NOTES:

1. Lighting Fixtures - Panel will sometimes require additional cutting for proper installation. Louver panels can also be specified with the Avoida-Notch™ optional frame - to specify add suffix-AN100 to the base catalog number for both the Deco-Round 33 and Deco-Round 50. For color designation use B for black, W for white SP for Specular Finish. The color designation should follow SP (i.e., G for Gold, S for silver).
2. Lighted Ceilings - Louver panels are designed to fit any standard 1' x 4', 2' x 2' or 2' x 4' tee bar grid system.
3. Special Sizes - additional sizes are available, please contact A.L.P. with this request.

Specifications

Parabolic Louvers shall be Deco-Round 33 or Deco-Round 50 as manufactured by A.L.P. Lighting & Ceiling Products, Inc. These louvers shall be one piece injection molded of polystyrene base material. Deco-Round 50 cell sizes - 1" diameter cone set into a 1-5/16" cube louver pattern, providing 40° shielding from all angles. Deco-Round 50 cell sizes - 1-3/8" diameter cone set into a 1-7/8" cube louver pattern, providing 45° shielding from all angles.

Specular finishes shall have all parabolic surfaces prepared with a primary undercoat and a highly specular (mirror-like) vacuum metalized finish.