ALP Lighting - Page 19

This program offers a selection of standard "made to order" panel heights of 3/4", 1-1/2", 2" and 3" fixed. There is the flexibility of choice in cell configuration. Panels can be ordered for specific fixtures. There is also a choice of flange styles and materials. Because we are using existing tooling you have the benefit of custom design without the custom cost.

CUSTOM ALUMINUM

The A.L.P. Engineering Department can assist with your custom design for aluminum louvers, baffles and corners for specific requirements or custom applications. There is little or no restriction as to size, style or finish. Let us quote from a drawing or help create a specification.

CALL CUSTOMER SERVICE DIRECT FOR DETAILED INFORMATION

OR ORDER FORMS ON EITHER OF THESE PROGRAMS.

An Exciting Concept in Lampholders Rotary Locking Insures Positive Contact for Safe Operation

A.L.P. rotary locking lampholders are designed with safety and reliability in mind. They feature the security of snap-in mounting and a molded polycarbonate body, along with phosphor bronze contacts and push wire terminals for up to four 18-20 gauge solid wires. Each lampholder will accommodate metal from .026" to .048" thick. Center hub (gray for internally jumped instant start, burgundy for rapid start) rotates with lamp and snap locks into place to insure safe operation. Listen for the click to assure you lamp is securely locked in place!

A molded stop in the face of the T8 Series lampholders prevents the accidental use of a T12 lamp. An added safety feature from A.L.P.

Visit our Web Site at WWW.ALP-LTG.COM