ALPOLIC - Page 20

THE FIRST ALUMINUM COMPOSITE MATERIAL TO OFFER TRUE EASE OF FABRICATION IN FIRE RATED MATERIAL

New ALPOLIC/fr^® offers the same flatness, rigidity, workability, formability and quality features of standard ALPOLIC/fr  ALPOLIC/fr^® is curvable to a 6'' radius and can be welded just like standard ALPOLIC^® to form complex shapes. In addition, ALPOLIC/fr^® is available in the same full pallet of bright, clean colors and gloss range as standard ALPOLIC^® and in sizes up to 62" wide and lengths greater than 20'.

Extensive fire performance laboratory testing by independent testing agencies in accordance with requirements set forth by BOCA, SBCCI and ICBO has established   ALPOLIC/fr^® approval on Type 1, 2, 3, 4 and 5 Construction throughout the United States when as a wall cladding material.

ALPOLIC/fr^® (fire rated)  

Fire performance has been testing laboratories using nationally recognized fire tests to determine resistance to fire when used as a wall cladding material.

Standard panel sizes:

50'' x 122"

50" x 146"

50" x 196"

62" x 122"

62" x 146"

62" x 196"

Range of sizes:

Width 32" - 62"

Length 6'0'' - 24'2"

ASTM E84

Flame spread: 0

Smoke developed: 10

ASTM E108 modified: Passed

ASTM 1929, ignition temperature:

flash 811°F

ignition 837°F

UBC 26-9, intermediate scale multi-story apparatus test: Passed

UBC 17-2, potential heat release: <6000 BTU/ft²

Combustion gas toxicity per University of Pittsburgh:"No more toxic than wood".

©1997 Mitsubishi Chemical America, Inc. All rights reserved.

ALPOLIC^® and A-LOOK^® are registered trademarks of Mitsubishi Chemical Corporation.

This publication contains the latest information available at printing. Mitsubishi Chemical America, Inc. reserves the right to change or withdraw information contained herein without prior notice. Suitability of use or manner of use of any product contained here in or any infringement of patents is the sole responsibility of the user.