ANCHOR DIAMOND® SERIES
Brilliant, Enduring Solutions for Commercial and Residential Needs.
The Anchor Diamond Series offers all the advantages of cast in place, timber, boulder and crib walls - but with a very important difference. An
integral rear lip speeds installation, eliminates guesswork and reduces labor costs by automatically delivering a quick, uniform setback.
Anchor Diamond® and Anchor Diamond Pro™ walls can be built up to four feet* and three feet*; respectively, total wall height without
geosynthetic reinforcement.
|
Cost-effective solutions for a broad range of commercial, municipal and residential projects - from modest borders to towering
geosynthetic reinforced walls. |
|
Straight and beveled splits make it easy to construct curves, 90° corners and terraces. Unsurpassed design flexibility includes optional
step and cap units. |
|
High quality concrete ensures low maintenance and Anchor Diamond's rugged beauty only gets better with time. |
|
|
Anchor Diamond
(beveled unit shown) |
Anchor Diamond Pro
(beveled unit shown) |
ANCHOR VERTICA® SERIES
Additional Solutions for Tall Wall Needs
The Anchor Vertica Series was created exclusively to meet the demands of commercial tall wall construction and can be built to virtually any
height. Geosynthetic reinforcement can be eliminated for Anchor Vertica® walls up to approximately three feet*. Furthermore, Anchor Vertica
Pro® walls can be built to approximately six feet* total height as gravity walls.
|
Nearly vertical rise helps conserve valuable real estate and also means less excavating. The natural rock face texture enhances any
landscape plan. |
|
Installation is easy - built-in locators set each course in place and also ensure proper alignment. |
|
Series includes two units, plus caps and corners for greater design and construction freedom. Every unit provides approximately one
square foot of face coverage. |
|
High quality concrete ensures low maintenance and Anchor Vertica's rugged beauty only gets better with time. |
|
|
Anchor Vertica
(beveled unit shown) |
Anchor Vertica Pro
(beveled unit shown) |
ANCHOR DIAMOND SERIES® SPECIFICATIONS
Anchor Diamond Beveled Unit
Dimensions |
|
6" x 15-7/8" x 12" |
Approximate Weight |
|
68 lbs. |
Coverage |
|
0.67 sq. ft. |
Setback (batter) |
|
1-1/8" (10.6º) |
Anchor Diamond Straight Unit
Dimensions |
|
6" x 17-1/4" x 12" |
Approximate Weight |
|
72 lbs. |
Coverage |
|
0.72 sq. ft. |
Setback (batter) |
|
1-1/8" (10.6º) |
Anchor Diamond Pro Beveled Unit
Dimensions |
|
8" x 18" x 12" |
Approximate Weight |
|
85 lbs. |
Coverage |
|
1.0 sq. ft. |
Setback (batter) |
|
1" (7º) |
Anchor Diamond Pro Straight Unit
Dimensions |
|
8" x 18" x 12" |
Approximate Weight |
|
86 lbs. |
Coverage |
|
1.0 sq. ft. |
Setback (batter) |
|
1" (7º) |
Anchor Diamond Cap Unit
Dimensions |
|
3" x 17-1/4" x 10" |
Approximate Weight |
|
32 lbs. |
Anchor Diamond Step Unit
Dimensions |
|
6" x 16" x 12" |
Approximate Weight |
|
85 lbs. |
Anchor Diamond Pro Cap Unit
Dimensions |
|
4" x 17-1/4" x 10" |
Approximate Weight |
|
40 lbs. |
Anchor Diamond Pro Corner Unit
Dimensions |
|
8" x 18" x 9" |
Approximate Weight |
|
101 lbs. |
ANCHOR VERTICA SERIES® SPECIFICATIONS
Anchor Vertica
Dimensions |
|
8" x 18" x 11" or 7-1/2" x 18" x 11" |
Approximate Weight |
|
86 lbs. or 80 lbs. |
Coverage |
|
1 sq. ft./unit or .94 sq. ft./unit |
Setback (batter) |
|
0.5" (4º) |
Anchor Vertica Pro
Dimensions |
|
8" x 18" x 20" or 7-1/2" x 18" x 20" |
Approximate Weight |
|
115 lbs. or 108 lbs. |
Coverage |
|
1 sq. ft./unit or .94 sq. ft./unit |
Setback (batter) |
|
0.5" (4º) |
Anchor Vertica Cap
Dimensions |
|
4" x 17-1/4" x 10" or 3-3/4" x 17-1/4" x 10" |
Approximate Weight |
|
40 lbs. or 33 lbs. |
Anchor Vertica Corner
Dimensions |
|
8" x 18" x 9" or 7-1/2" x 18" x 9" |
Approximate Weight |
|
101 lbs. or 94 lbs. |
|
