Architectural Letters
Backlighted Letters
Backlighted letters are precision cut from .090" or .125" aluminum and custom fabricated to allow perimeter neon illumination. Letter faces are
constructed from aluminum and the backs of the letters are left open. Backlighted letters must be mounted to project from the wall a minimum
of 2". The backlighted letter provides a subdued lighting effect. Transformers of 120 or 277 volts must be able to be located either inside the
letter or inside the building.
Custom Cast Letters
Cast letters are available in both aluminum and bronze. Both materials are available in many standard letterstyles as well as any custom
letterstyle or logo. All cast letters are individually cleaned, sanded and filed until they meet the Andco standard of quality. Cast letters are
available in sizes up to 20". For larger letters, please specify Andco's Reverse Channel letters.
Custom Plate Letters
Plate letters are available in aluminum and brass. Both materials are available in 1/8", 1/4", 3/8", and 1/2" thicknesses. Plate letters are ideal
for custom logos and letterstyles. For letters and logos larger than 24", Andco recommends the Reverse Channel construction.
Andco Industries Corporation
Manufacturers of Custom and Standard Architectural Interior and Exterior Signage
PO Box 7366 (27417 - 0366) • 4100 Sheraton Court (27410-8120) • Greensboro, NC
910-299-4511 • Toll Free 800-476-8900 • FAX 910-299-4700
Internet Address: http://www.andco.com
