Rough-ins are approved for use in all ceiling types except concrete pour. To order Rough-in for use with a remote tranformer, add - 12 to the catalog number.

(Example: A30S-12).

A30I

• Stamped galvanized steel frame and housing.
• Adjustable hanger bars included, expand to 25" (144mm).
• Galvanized steel junction box with pryout knockouts. Rated for through branch wiring, 4-in/4-out, #12 AWG wire, rated 90 degree C minimum. Accessible from below ceiling.
• Class H electromagnetic transformer. 120 volt input, 12 volt output. Accessible from below ceiling.
• Thermal Protector, opens circuit at 110 degrees C.
• Female socket connector. Socket and male connector supplied with the Trim.
• certified for safe use in direct contact with insulation.

A30R

• Stamped galvanized steel can and connection box assembly.
• Galvanized steel junction box with pryout knockouts. Rated for through branch wiring, 1-in/1-out, #12 AWG wire, rated 90 degree C minimum. Accessible from below ceiling.
• Class H electromagnetic transformer. 120 volt input, 12 volt output.
• Thermal Protector, opens circuit at 110 degrees C.
• Female socket connector. Socket and male connector supplied with the Trim.
• certified for safe use in ceilings without insulation, or where insulation is kept 3" away from all sides and 1" above.

A30S

• Stamped galvanized steel frame.
• Adjustable hanger bars included, expand to 25" (144mm).
• Galvanized steel junction box with pryout knockouts. Rated for through branch wiring, 4-in/4-out, #12 AWG wire, rated 90 degree C minimum. Accessible from below ceiling.
• Class H electromagnetic transformer. 120 volt input, 12 volt output. Accessible from below ceiling.
• Thermal Protector, opens circuit at 110 degrees C.
• Female socket connector. Socket and male connector supplied with the Trim.
• certified for safe use in ceilings without insulation, or where insulation is kept 3" away on all sides, and 1" above.