Indigo offers two types of trims. The functional reflector - in two designs - gives comparatively downward light distribution, while the decorative glass disc gives more diffuse light distribution. Opal diffusers prevent direct sight of the light source on both options.

Indigo is supplied with an HPF electronic ballast. It can also be fitted with a ballast for dimming, for improved operation and energy savings. An emergency battery pack is also available.

INDIGO CIRCLE
ALI-XX-XXX-XX

DESIGN
Rough-in unit of natural-finished galvanized steel. Dish-shaped secondary reflector, powder coat painted.

LOUVER
Aluminum reflector in two designs. Aluminum finish on the inside and outside, or specular anodized finish on the inside and aluminum enamelled finish on the outside. An opal diffuser rests on top of the reflector to eliminate glare.

Assemby plates for suspended ceilings with visible T-bars provide easy installation. The cassettes are finished in the same powder coat paint as used on the secondary reflector to give a harmonious appearance.

TRIM #24473

32W PLT

INDIGO CIRCLE
ALI-XX-XXX-XX

DESIGN
Rough-in unit of natural-finished galvanized steel. Dish-shaped secondary reflector, powder coat painted.

LOUVER
Sand-blasted glass plate/glass disc with cylindrical opal diffuser of acrylic plastic. The diffuser eliminates glare.

Assemby plates for suspended ceilings with visible T-bars provide easy installation. The cassettes are finished in the same powder coat paint as used on the secondary reflector to give a harmonious appearance.

DESIGN
Thorulf Löfstedt, T Design.

ORDERING INDIGO CIRCLE

ROUGH-INS INCLUDE ASSEMBLY PLATE FOR "LAY-IN" INSTALLATION IN SUSPENDED CEILINGS

TRIMS

DECORATIVE FUNCTIONAL

24475

24471 - ALUMINUM INSIDE AND OUTSIDE

24473 - SPECULAR INSIDE AND ALUMINUM OUTSIDE

A subsidiary of JJI Lighting Group, Inc.
P.O. Box 1769
639 Washburn Switch Road
Shelby, NC 28151
Telephone: 704/482/2811
Fax: 800/275-1544

e-mail: ardee@shelby.com

A SUBSIDIARY OF JJI LIGHTING GROUP, INC.