Specifications (Ardee Lighting, Inc)

TYPE ________________

CATALOG NUMBER _______________

Low Voltage Remodeler Rough-In for Installation in Existing Ceilings

FEATURES

Stamped galvanized steel frame and connection box assembly.
Galvanized steel junction box with pryout knockouts. Rated for thru branch wiring, 1-in/1-out, #12 AWG wire, rated 90 degree C minimum. Accessible from below ceiling.
50VA class H electromagnetic transformer. 120 volt input, 12 volt output.
Spun aluminum trim can with attachment clips. Maximum ceiling thickness 1-1/2" (38mm).
Thermal Protector, opens circuit at 110 degrees C.
Female socket connector. Socket and male connector supplied with the Trim.

CSA Nationally Recognized Testing Laboratory certified for safe use in ceilings without insulation, or where insulation is kept 3" away from all sides and 1" above.

ORDERING INFORMATION

Rough-In Catalog Number

Catalog Number

A30R

Rough-ins are approved for use in all ceiling types except concrete pour.
See back for the selection of approved trims and lamp wattages available.
To order rough-in for use with a remote transformer, add -12 to the catalog number. (Example:A30R-12).

ROUGH-IN / TRIM / LAMP MATRIX
Rough-In Model Number	Trim	Max. Lamp Wattage/Type
A30R	ASX3	35W, MR-11
	ASX5	35W, MR-11
	ASX6	35W, MR-11
	ASX7	35W, MR-11
	ASX8	55W, JA-12 LP
	ASX9	55W, JA-12 LP
	DL23	35W, MR-16
	DL31	35W, MR-16
	DL43	35W, MR-16
	LiCrea Series 573#	35W, MR-16
	LiCrea Series 572#	35W, MR-16

Ardee Lighting Inc. P.O. Box 1769, Shelby, NC 28151

Tel: 704/482-2811 Fax: 800/275-7544

A SUBSIDIARY OF JJI LIGHTING GROUP, INC.

A30R-9/97

Specifications - Page 3