| SERVICE AND
THERMAL DOORS |
GUIDE DETAILS
The guides on a Coiling Door serve two important functions.
The wall angle supports the full weight of the door and coil assembly from the wall and
lintel above. It also supports the two other angles that form a track for the curtain that
keeps the door in position, even under a windload. Usually made up of three steel angles,
the guides can be manufactured from aluminum or stainless steel as an option to the
standard. Shown here are five examples of guide mounting conditions to suit most
applications.
The All-Weather Rolling Service Door is fully weather
stripped around the door's perimeter, minimizing the infiltration of wind, dust, and
nature's elements. Hood baffle in Thermal Door details.
| OPENING WIDTH |
''A'' |
''B'' |
| |
to |
12'-4-7/8'' (3781mm) |
8-1/2'' (215.9mm) |
12-1/2'' (317.5mm) |
| 12'-5'' (3785mm) |
to |
22'-4-7/8'' (6989mm) |
9'' (228.6mm) |
13'' (330.2mm) |
| 22'-5'' (6833mm) |
to |
24'-4-7/8'' (7439mm) |
9-1/2'' (241.3mm) |
13-1/2'' (342.9mm) |
| |
over |
24'-4-7/8'' (7439mm) |
CONSULT TECHNICAL
SERVICES |
| OPENING HEIGHT |
NO WINDLOCKS REQ. |
WITH WINDLOCKS |
| |
|
|
''D'' |
''G'' |
''D'' |
''G'' |
| |
to |
9'-1'' (2769mm) |
17'' (432mm) |
17-1/2'' (445mm) |
18'' (457mm) |
18-1/2'' (470mm) |
| 9'-1/8'' (2772mm) |
to |
11'-1'' (3378mm) |
18'' (457mm) |
18-1/2'' (470mm) |
19'' (483mm) |
19-1/2'' (495mm) |
| 11'-1-1/8'' (3381mm) |
to |
13'-1'' (3988mm) |
19'' (483mm) |
19-1/2'' (495mm) |
20'' (508mm) |
20-1/2'' (521mm) |
| 13-1/8'' (3991mm) |
to |
15'-1'' (4597mm) |
20'' (508mm) |
20-1/2'' (521mm) |
21'' (533mm) |
21-1/2" (546mm) |
| 15-1-1/8'' |
to |
17'-1'' (5207mm) |
21'' (533mm) |
21-1/2" (546mm) |
22'' (559mm) |
22-1/2'' (572mm) |
| 17'-1-1/8'' (5210mm) |
to
|
20'-1'' (6121mm) |
23'' (584mm) |
23-1/2'' (597mm) |
24'' (610mm) |
24-1/2'' (622mm) |
| |
over |
20'-1'' (6121mm) |
CONSULT TECHNICAL
SERVICES |
** Suffix letters indicate material and/or finish of
curtain.
GS Galvanized steel, not painted galvanized steel
PS Galvanized steel with baked-on coat of primer paint .
MA Mill finish aluminum
DA Bronze duranodic aluminum
AA Clear anodized aluminum
ST Stainless steel
Windlocks are standard on thermal doors over
22'- 4 -7/8'' (6829mm) wide and optional for doors under 22'-4-7/8'' (6829mm)
wide for excessive windloading.
Maximum size recommended for manual push-up operation is
80sq. ft. (7.43m2) or 8'-4'' (2540mm) high.
3'' (76.2mm) is dimension of top hood bead. Where headroom
is limited, 3'' (76.2mm) requirement can be eliminated by turning bead down.
Windlocks are standard on service doors over
18'-4-7/8" (5610mm) wide and optional for doors under 18'-4-7/8'' (5610mm) wide
for excessive windloading. |
