Atlas Door Commercial (Atlas Door)

LIFE SAFETY™ PRODUCTS

CONSUMER SAFETY PRODUCT INNOVATION

ATLAS DOOR LIFESAFETY™ PRODUCTS PROVIDE A TOTAL SYSTEMS APPROACH TO DOOR SAFETY. Technological advances require continuing evaluation and testing by Atlas Door to assure totally integrated systems with approvals from ULI, ULC, FM and CSFM. You won't have to wade through volumes of test results to find your own system. Atlas Door's complete line of devices provides a one-source solution for whatever your project's requirements may be.

Atlas Door products have been carefully included in the line to meet current building code and insurance requirements. And, we have assisted in engineering custom system that have established new standards in the use of these safety products.

FIRE SCOUT®

FUNCTION / FEATURE	MODEL
	A	B	B2	C*
Fail Safe	*	*	*	*
Time Delayed (10-10)seconds in Signal Mode	*	*	*	*
Time Delayed (0-30) seconds in Power Loss Mode	*	*	*	*
Activates Peripheral Devices with independent Power Source		*	*	*
Internal Battery to Independently Power Peripheral Devices		*	*	*
10-Second Warning Indicator			*	*
Power Down Through Motor Operator				*
Trouble Diagnostic Capabilities				*
Optional Voice Enunciator Available			*	*

* Requires Electric Sensor Edge

FIRE POWER™

FUNCTION / FEATURE	MODEL
	1	2	3	4	5	6
Works on Applied Signal (by others)	*	*		*
Works on Maintained Signal (by others)			*		*	*
Electrical Sensing Edge (stop and reverse)	*	*	*	*	*	*
Adjustable Time Delay (0-30 seconds)	*
FS or Fire Scout® Release Device			*		*
AR, ETL, or McCabe Link® Release Device	*	*
Remote Test Switch				*

FIRE SCOUT® RELEASE DEVICE

A timely delay used with coiling fire doors and labeled shutters. Provides a preset delay before the automatic closing of a fire-rated product during a power outage. Can be wired to either a smoke detector or directly to the central alarm system. Available in any of the following voltages: 120 VAC, 24 VAC, 24VDC (please specify.)

The Fire Scout has additional features such as a system test button, two system status indicator lights, and a manual release / reset lever. ULI, ULC, and CSRM approved.

FIRE POWER™

Fire Power control system allow the door to be motorized down while a fire alarm condition exists. Note: Sensor Edge option is required with Fire Power.

This system is recommended for areas where false alarms occur and where frequent system tests are required. Once the alarm signal has been turned off, the doors can again be operated normally. Please review your local fire codes for specific restrictions.

Note: Not all products can be equipped with each other.

Atlas Door Commercial - Page 9