| COILING
COUNTER SHUTTERS |
|
PART 3 EXECUTION 3.01
Installation
A. Installation: by Atlas Door authorized
representative and in accordance with Atlas Door standards and instructions.
Optional Coiling
Counter Shutter Features / Specifications
- Steel Shutter Slats: stainless steel.
- Bottom Bar can have lift handle on both sides
- Sensor Edge (for Motorized shutters): See LIFESAFETY
Products
- Perforated Slats provided in curtain. Furnish
individual slat each 5'' (127mm) wide x 3/4'' (19mm) high.
- Bracket Plates made of (galvanized steel).
- Guides (galvanized steel) (stainless steel)
shapes. Please consult Atlas Door Technical Services for exact specifications
at 800-959-9559.
- Hoods fabricated of (clear anodized aluminum) (bronze color
aluminum) (gray painted galvanized steel) (tan painted galvanized steel) (stainless
steel). Furnish neoprene Hood Baffle in hood to prevent air infiltration.
- Locking Slide Bolts: on bottom bar, suitable
for padlocks (padlocks by others). Cylinder Locks: on bottom bar.
- Aluminum Surfaces (clear anodized) (bronze color) aluminum.
- Steel Surfaces stainless steel.
- Powder Coat Finish: provide a powder coat colored finish on
both sides of the slat or other door components. Choice of 10 standard colors are
available. Specify manufacture's number for custom colors
- Transom Panel: provide 4-sided frame with slat material to
match shutter.
- Removable Mullions: provide are movable
giode assembly, below lintel, between adjacent shutters.
- Fixed Mullions: provide fixed guide assembly, below lintel,
between adjacent shutters.
COUNTER SHUTTER DETAILS
Typical Face Mounting Shown
 |
F1
- MIDGET SLAT - 1-1/4'' (31.75mm) high, 1/2'' (12.70mm)
deep. Aluminum, galvanized steel, stainless steel for standard counter
shutters, galvanized steel or stainless steel for labeled, fire-rated
counter shutters, smoke doors and side coiling shutters. |
 |
F1A-MIDGET SLAT
- 1-1/2'' (38.10mm) high, 1/2'' (12.70mm) deep, Extruded aluminum, for
counter shutters and side coiling shutters. |
 |
W1
- WOOD SLAT - 1-5/8'' (41.28mm) high, 1/2'' (12.70mm)
deep. For wood counter shutters, Red oak standard. Available in a
wide variety of other woods. |
|
