Atlas Door Commercial (Atlas Door)

MOTOR OPERATORS

COMMERCIAL MOTOR OPERATORS ARE RECOMMENDED FOR CONVENIENCE OF OPERATION FOR SERVICE DOORS, FIRE DOORS, ROLLING GRILLES, SIDE COILING DOORS AND GRILLES, AND SHUTTERS. Atlas Door motor operators are assembled using electrical components satisfying NEMA specifications, and are listed by ULI and ULC.

Atlas Door operators are specifically designed to provide maximum reliability over a long life and to minimize electrical field wiring. Particular electrical controls can be provided, including special control stations such as keyed, treadle or pull cord operating stations. Watertight, oil-tight and explosion proof components can also be provided, to be wired by others.

Various mounting positions are possible for each operator, including vertical front of hood, wall mounting, over-the-hood and horizontal front-of-hood positions. The latter mountings are used in the event of special clearance problems.

MOTOR OPERATOR SERIES

STANDARD FEATURES	JO	HO	HF	MO	MF	SMO
Bracket mounting plate (vertical and horizontal front of hood installations)	*	*	*	*	*	*
Adjustable rotary limit switch	*	*	*	*	*	*
High starting torque, continuous duty motor	*	*	*	*	*	*
Thermal overload protection	*	*	*	*	*	*
Magnetic reversing connector	*	*	*	*	*	*
3-Button control station	*	*	*	*	*	*
NEMA type 1 electrical enclosure	*	*	*	*	*	*
24 volt control circuit	*	*	*	*	*	*
Manual emergency release	*	*	*	*	*	*
UL-Listed	*	*	*	*	*	*
Heavy duty V-belt drive	*	*	*	-	-	-
Adjustable friction clutch	*	*	*	-	-	-
Chain and sprocket reduction	*	*	*	-	-	-
Emergency auxiliary chain hoist	-	*	*	*^	*	-
Necessary components to release drive mechanism from the door	-	-	*	-	*	-
Heavy duty worm gear reduction	-	-	-	*	*	-
Gear reduction running in continuous oil bath	-	-	-	*	*	*
Solenoid activated brake	-	-	-		*	*

^ Except on Model MO-30 operators.

Options:

Additional 3 Button Stations, NEMA, 3R, 4, 4X, 7, 9, or 12.

Key Switch- Flush Mounted NEMA 1 or 4.

Key Switch- Surface Mounted NEMA 1, 3R, 4, 4X, 7, 9, or 12.

3 Button With Keyed Lock Out, Surface Mounted NEMA 3R, 4, 4X, 7, 9, or 12.

Timer, to close, (requires Sensor Edge Bottom bar).

Loop Detector, to open to close.

Card Reader, to open to close.

Radio Control, to open, to close to open & close

Pull Cord, to open to close.

Electric Eye, to open to close, to hold open.

Roll Back Circuit, requires constant pressure to close, if button is released prior to fully closed, product will return to full open.

Intermediate Stop, additional up limit switch that will stop product at a predetermined height and require another signal to open to full open height.

Air Lock Setup, used to prevent heat loss or for security reasons. Two doors wired such that either door must be in the fully closed position prior to the other opening.

Warning Light, wired to light at full open, full close or during operation.

Warning Bell, wire to sound at full open, full close or during operation.

T.E.F.C.:Totally Enclosed Fan Cooled. Motor Housing.

T.E.N.V.: Totally Enclosed Non-Ventilated Motor Housing.

Clutch, friction type added between motor and gear reducer, NEMA1.

Non-Resettable Electric Counter, Used to count cycles of operation.

Electronic Interlock, wireless interlocking device.

Combo Starter

Magnetic Disc Brake, for V.H.C. operation.

Edge, electric pneumatic.

Atlas Door Commercial - Page 21