TILE BRIDGE - Model FA81-4

The Strategy System ^® tile bridge for 4" loudspeakers is designed to prevent ceiling tile sag by distributing the loudspeaker assembly weight to the ceilings support members. Model FA81-4 accepts enclosure Model Series FA95-4 and FA97-4 and is constructed of 24-gauge electro-galvanized steel.

PLASTER RING - Model FAPR-4

Model FAPR-4 plaster ring is used to mount Strategy System ^® 4" loudspeakers into ceilings and walls tor applications where an enclosure cannot be used, or where it is not desired. Unit is constructed with the same internal mounting flange as FA97-4 and FA95-4 enclosures. It may be used to mount non-transformer equipped loudspeaker models into walls having a min. depth of 2-7/16". The FAPR-4 will facilitate installation of transformer-equipped loudspeaker models into walls with a minimum depth of 4- 3/8"*. Plaster ring is constructed of 20-gauge CRS and finished in textured black epoxy. It is equipped with four threaded inserts for loudspeaker installanon and three stud receptacles for mounting Strategy System ^® grilles. The mounting mechanism is comprised of three rotating clamps (included).

*Measured from the front of the mounting surface to the rear of the inside mounting area.

TRIM RING - Model FA-TR4

The Strategy System ^® FA-TR4 trim ring 'rough-in bracket, for wall or ceiling-mount applications, installs prior to the drywati and serves as a pattern cut-out for the drywall contractor to finish-out the wall leaving the proper opening for a FA97-4 or FA95-4 enclosure. This step identifies pre-wire location, expediting sound system installation. Trim ring measures 25-5/8" L and will accommodate 3/8" to 1-¼" drywall. Mounting holes are provided to match both 16" and 24" center studs. FA-TR4 is finished in black epoxy.