| STRATEGY SERIES 4" SYSTEM INSTALLATION Figure 1: Enclosures mount quickly using rotating damps.
Grille push-mount with "easy-fit" weeded studs.
Figure 2: Enclosure installation from below ceiling
using tile bridge above. This room-side installation into suspended tite utilizes rotating
clamps to sandwich tile between bridge and enclosure Max ceiling thickness is 1-¼".
Figure 3: Enclosure installation from above ceiling
using tile bridge (new construction). Rotating clamps are used TO pre-mount tile bridge to
enclosure, allowing system to be positioned in ceiling before tiles are set. Please note
maximum ceiling thickness in this application is 5/8" to allow grille studs to mount
into enclosure.
Figure 4: Enclosure installation from below celling
without tile bridge. This blind-mount installation method, which is most common in
plaster, drywalt. and retrofit applications. is accomplished by cuttinc an opening to
size. inserting the enclosure, and rotating the ctamps. Max. celling thickness is
1-¼".
Figures 5: Illustrates wall-mount
installation using plaster ring Model FAPR-4. A minimum wall depth of 2-7/16" from
rim of the plaster ring to the back of the speaker) is required for mounting
.
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
Please refer to SL1-1533 (FA134) or SL1-1524 (FA114) for
architectural and engineering system specifications.
ATLAS / SOUNDOLIER ATAPCO SECURITY &
COMMUNICATION GROUP
1859 INTERTECH DRIVE / FENTON, MISSOURI 63026 U.S.A. / TELEPHONE:
(314) 349-3110 / FAX: (314) 349-1251
SL1-1512 |
