Loudspeaker system shall be Atlas/Soundolier Strategy System ^®. System shall include a high performance. 6" coaxial loudspeaker Model FA136, acousticalty matched enclosure Model (FA97-6, FA97- 6NK) and flush grille Model (FA51 -6, FA170- 6, FA720-6, FA730-6). Nominal frequency response of the system shall be 80 Hz-20 kHz and the sensitivity shall be 91 dB (peak) and 88 dB (average) measured at 1W/ 1M across the full bandwidth. Power rating shall be 35 watts RMS. Unit shall be comprised of a 6" dia. low frequency driver constructed of fiber-reinforced polypropylene and synthetic rubber surround. High-frequency driver shall be a post-mounted ferrofluid device with mylar diaphragm. Magnet shall be a minimum of 14 oz. (398g) and the voice coil diameter shall be 1" (25mm). Dispersion shall be 130° . Transformer equipped models shall include factory wired (25, 70.7, 100) volt transformer with primary taps of (.5, 1, 2, 4 or 1, 2, 4, 8) Loudspeaker shall front-load specified FA97- 6(NK) or optional FA95-6(NK), FA175-6, 617-6WD enclosure or Model FAPR-6 plaster ring or quick-fit frame/grille Model FA-6G. Enclosures shall use (toggle clamps, conventional screws) for celling installation and stud receivers for grille mounting. Other optional accessories include:(FA-81-6 tile bridge. FA-TR6 trim ring, FAMT-6 adapter for 8" grilles). The FA97 enclosure models shall be lined with high density acoustic batting.

FA136: Frequency Response ( Measured in FA97-6 Enclosure)

FA136: Fundamental vs. 2nd & 3rd Harmonics (raised 20 dB) @ 1 Watt ( Measured in FA97-6 Enclosure)

FA136: Impedance

FA136: Frequency Response Overlay at 0, 15, 30, and 45 degress ( Measured in FA97-6 Enclosure)

Octave Bends Normalized to Zero On Axis ( Measured in FA97-6 Enclosure) Techron TEF^®

Kevlar^® is a Registered Trademark of E.I. Du Pont De Nemours and Company

1859 INTERTECH DRIVE / FENTON, MISSOURI 63026 U.S.A. / TELEPHONE: (314) 349-3110 / FAX: (314) 349-1251

SL1-1436