| SURFACE MOUNT ENCLOSURES - FA175-6 and 617-6WD Unique
to the Strategy Series 6" system are surface mount enclosure Models FA175-6
and 617-6WD. Both attractive enclosures will accommodate the FA136 or FA116 to meet
application requirements. FA175-6. This square,
surface-mount enclosure accepts Model FA170-6 push-on grille and is ideal for
institutional, health care, and industrial applications. The enclo- sure is constructed of
20-ga. CRS, undercoated, patch jute lined, and finished in textured white. Dimensions:
10" W (254mm) x10" H (254mm) x 6" D (105mm). Internal cubic feet: .347
617-6WD. Wooden slope-front wall baffle/enclosure allows for
surface mount installation of Strategy Series 6" loudspeakers. The ported
enclosure, which is covered in a textured black vinyl and includes a black fabric grille,
is perfect for reserved applications such as corporate, educational, religious, and office
suite venues. Dimensions: 8" W (203mm) x 9" H (229mm) x 6-7/8" (175mm) top
projection x 4-½ " (114mm) bottom projection. Internal cubic feet: .237
MOUNTING ACCESSORIES
ARCHITECTURAL SERIES IN-CEILING FRAME / GRILLE - Model FA-6G
The Architectural Series FA-6G in-ceiling frame/grille for
mounting Strategy Series 6" loudspeakers is designed as a companion for
in-wall Models AS76, AS88, and AS66. Select the FA-6G for installation of 6" ceiling
loudspeakers into shallow applications where an acoustic enclosure will not fit. The white
quick-fit plastic frame with three integral rotating clamps, cosmetic fabric shield, and
perforated metal grille presents a stylish appearance. The FA-6G can be mounted into
ceilings up to 1-¼" thick, has a cutout dia. of 6-½ ", and a frame dia. of
7-¾".
PLASTER RING - Model FAPR-6
Model FAPR-6 plaster ring is used to mount Strategy Series
6" loudspeakers into ceilings and walls for applications where an enclosure cannot be
used, or where it is not desired. Unit is constructed with the same internal mounting
flange as FA97-6 and FA95-6 enclosures. It may be used to mount non-transformer equipped
loudspeaker models into walls having a min. depth of 3-½ "*. The FAPR-6 will
facilitate installation of transformer-equipped loudspeaker models into walls with a
minimum depth of 5-½ "*. Plaster ring is constructed of 20-gauge CRS and finished in
textured black epoxy. It is equipped with four threaded inserts for loudspeaker
installation and three stud receptacles for mounting Strategy Series grilles. The
mounting mechanism is comprised of three rotating clamps (included).
*Measured from the front of the mounting surface to the rear of the
inside mounting area.
| MODEL |
A |
B |
C |
CUT-OUT DIMENSION |
NET WEIGHT LBS / KGS |
| FAPR-6 |
6-7/8" (175mm) |
9-3/8" (238mm) |
7/8" (22mm) |
8-5/16" (211mm) |
2.75 Ibs (1.25kgs) |
TRIM RING - Model FA-TR6
The Strategy Series FA-TR6 trim ring/rough-in bracket, for
wall or ceiling-mount appli- cations, installs prior to the drywall and serves as a
pattern cut-out for the drywall contrac- tor to finish-out the wall leaving the proper
opening for a FA97-6 or FA95-6 enclosure. This step identifies pre-wire location,
expediting sound system installation. Trim ring measures 25-5/8"L and will
accommodate 3/8" to 1-¼" drywall. Mounting holes are provided to match both
16" and 24" center studs. FA-TR6 is finished in black epoxy.
| MODEL |
A |
B |
C |
NET WEIGHT LBS / KGS |
| FA-TR6 |
25-5/8" (651mm) |
8-3/8" (213mm) |
11-¼" (285mm) |
1.25 Ibs (.57 kgs) |
|
