| STRATEGY SERIES 6" SYSTEM INSTALLATION Figure 1: Enclosures mount quickly using rotating clamps.
Grille push-mounts with "easy-fit" welded studs.
Figure 2: Enclosure installation from below ceiling
using tile bridge above. This room- side installation into suspended tile utilizes
rotating clamps to sandwich tile between bridge and enclosure. Max. ceiling thickness is
1-¼".
Figure 3: Enclosure installation from above ceiling
using tile bridge (new construction). Rotating clamps are used to pre-mount tile bridge to
enclosure, allowing system to be positioned in ceiling before tiles are set. Please note
maximum ceiling thickness in this application is 5/8" to allow grille studs to mount
into enclosure.
Figure 4: Enclosure installation from below ceiling
without tile bridge. This blind- mount installation method, which is most common in
plaster, drywall, and retrofit applications, is accomplished by cutting an opening to
size, inserting the enclosure, and rotating the clamps. Max. ceiling thickness is
1-¼".
Figure 5: Illustrates wall-mount installation using
plaster ring Model FAPR-6. A mini- mum wait depth of 3-½ " (from rim of the plaster
ring to the back of the speaker) is required for mounting.
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS
Please refer to SL1-1436 (FA136) orSLI-1437 (FA116) for
architectural and engineering system specifications.
ATLAS / SOUNDOLIER ATAPCO SECURITY &
COMMUNICATIONS GROUP
1859 INTERTECH DRIVE / FENTON. MISSOURI 63026 U.S.A. /
TELEPHONE: (314) 349-3110 - FAX: (314) 349-1251
SL1-1438
Specifications are subject to change without notice |
