|
|
Atlas/Soundolier
Atlas Soundolier
Atlas Soundolier - Page 133
Atlas Soundolier
SPECIFICATIONS (UL RATING)
SPECIFICATIONS (ANECHOIC MEASUREMENTS)
ARCHITECTS' AND ENGINEERS' SPECIFICATIONS Voice control loudspeaker shall be Atlas/Soundolier Model (AP-15TU. AP-15TUC, AP-15TUCR). Weather-resistant unit shall be constructed of heavy-gauge, treated aluminum. Loudspeaker shall be able to operate within any ambient temperature environment ranging from 66°C (150°F) to - 35°C (-30° F). Model shall be a double re-entrant type with 15 watts RMS audio power rating compression driver producing a UL-rated sound pressure level of 102 dB measured at 15 watts, 10ft. (3 dB increment rating) within a frequency range of 400 Hz to 4 kHz. Impedance shall be 8 ohms and sound dispersion 70°. Unit shall have impedance selection via 7-position switch of 5000, 2500, 1300, 666, 333, 89 and 45 ohms. Power taps shall be available at 1, 2, 3.8, 7.5,15 watts for 70V line and .48, .94,1.8,7.5,15 watts for 25V line. Loudspeaker assembly shall be furnished with mounting bracket allowing adjustment on either a vertical or horizontal plane with a single locking pin and including provisions for mounting, banding, or strapping. Wiring terminals for amplifier output shall be fully enclosed, and a vandal-resistant adapter cover shall provide connection facilities for cable or conduit. Dimensions: 7-7/8" W x 8-¾" H x 9-5/16" D (200 x 222 x 237 mm). Unit shall be finished in gray or red baked epoxy. FEATURES
APPLICATIONS Atlas/Soundolier's UL Listed AP Series loudspeakers are surface-mounting, high-efficiency units for life safety and communication system applications. When used with compatible control equipment, they provide high-intelligibility voice reproduction and signal transmission for indoor or outdoor emergency alarm, protective signaling, and intercom system installations. GENERAL DESCRIPTION Atlas/Soundolier AP Series Omni-Purpose® loudspeakers are equipped with a compression driver providing up to 15 watts RMS power handling capability, superior intelligibility and dispersion to achieve maximum sound projection and penetration. Weather-resistant metal construction and re-entrant acoustic path assure protection against water, humidity, vermin, and corrosion. The Omni-Purpose® mounting bracket allows directional sound dispersion via vertical and horizontal positioning. Provisions are also included for surface or strap mounting to pillars and I-beams. All models include a built-in 25/70.7V Vari-Tap® transformer featuring a screw-driver adjustable, 7-position watt/impedance selection switch. Wiring terminals are protected with a vandal-resistant adapter cover for control equipment utilizing cable or conduit. A built-in, 5 mfd capacitor is provided on Model AP-15TUC(R) for line supervision. Model AP-15TU is not equipped with a capacitor. All models meet or exceed the UL Listed standards for audible signal appliances and are capable of operating within an ambient temp. range of 66°(150°F) to -35°C (-30°F). Models comply with UL Standard 1480—Speakers for Fire Protective Signaling Systems and California State Fire Marshal (Title 19). Models with special modifications to meet New York City MEA (Calendar no. 57-74-SA) and UL Canada are also available as standard product. Contact Factory. ACCESSORIES
BX-2A Vandal Resistant Cover Plate for Armored Cable and Conduit Connection. Constructed of Cast Aluminum.
AD-17. Mounting Adapter for Installing Omni-Purpose® Loudspeakers to ½" Diameter Pipe Thread ATLAS / SOUNDOLIER ATAPCO SECURITY & COMMUNICATIONS GROUP 1859 INTERTECH DRIVE / FENTON, MISSOURI 63026 U.S.A. / TELEPHONE; (314) 349-3110 / FAX; (314) 349-1251 ©1997Atlas/Soundolier Printed in U.S.A. 01097 SL2-1458 Specifications are subject to change without notice |
