architecture - engineering - construction
Atlas/Soundolier
Atlas Soundolier
Atlas Soundolier - Page 219
Atlas Soundolier
| INSTALLATION INSTRUCTIONS FOR UNIVERSAL CLOCK
HANGER BRACKET The universal clock hanger bracket
(patent pending) allows mounting of virtually any new as well as most older clocks to
Atlas/Soundolier clock/speaker baffles. The factory-installed hanger bracket allows
flexible orientation of clock/speaker baffles at time of installation and comes complete
with hardware bag equipped with nuts, bolts and stud bolts.
- Identify the clock bracket style used by the clock manufacturer
(typical examples are shown below).
- Determine portion(s) of the Universal Bracket required to mount the
clock. Note: Bracket can be unscrewed and re-oriented to meet individual needs.
- Determine the proper orientation of the baffle.(vertical or
horizontal)Verify mounting holes on the mounting bracket before trimming, if trimming is
required.
- Attach the clock to the clock/speaker baffle.
| CLOCK
BRACKET STYLE (supplied by clock
manufacturer) |
APPLICATION 830, 840, NC850 Series Clock/Speaker Baffles |
MOUNTING
HOLES/SLOTS (for most applications) |
| STUD TYPE BRACKET (bracket mounts through an attached bolt stud)
This configuration is typical of clocks by:
Cincinnati
Edwards
Faraday
Franklin |
|
| SPADE TYPE BRACKET (bracket simply hooks into a slot on the hanger bracket)
This configuration is typical of clocks by:
American Time & Signal
Dukane
Lathem
Rauland
Simplex |
|
| PLATE STYLE BRACKET (bracket supplied by clock maker bolts directly to universal hanger
bracket)
This is typical of clocks by National |
|
STRAP
HANGER APPLICATION
(break away the hangers from the side and bolt for clock
hanger)
This solution works on obscure older models or unique
brands.
|
BAFFLE MOUNTING HOLES Use the correct holes to mount bracket/clock to baffle.
Verify mounting holes before
any trimming! |
|
TRIMMING LOCATIONS (use these cutting locations only if needed so that clock hanger
mounts correctly to baffle). |
ATLAS / SOUNDOLIER ATAPCO SECURITY & COMMUNICATIONS GROUP
1859 INTERTECH DRIVE / FENTON, MISSOURI 63026 U.S.A. / TELEPHONE:
(314) 349-3110 / FAX: (314) 349-1251 |
